PSD813F2-A-70J STMicroelectronics, PSD813F2-A-70J Datasheet - Page 83

• Manufacturer Part Number: PSD813F2-A-70J
• Manufacturer: STMicroelectronics

Specifications of PSD813F2-A-70J

• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Operating Temperature Classification: Commercial
• Package Type: PLCC
• Mounting: Surface Mount
• Pin Count: 52
• Lead Free Status / RoHS Status: Compliant

PSD8XXFX
Table 31.
1. The bits of this register are cleared to zero following Power-up. Subsequent Reset (RESET) pulses do not clear the
Table 32.
1. The bits of this register are cleared to zero following Power-up. Subsequent Reset (RESET) pulses do not clear the
Bit 4
Bit 5
Bit 6
Bit 7
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit
Bit
registers.
registers.
PLD Array clk
PLD MCell clk
X
X
X
X
PLD Array
CNTL0
PLD Array
CNTL1
PLD Array
CNTL2
PLD Array
ALE
PLD Array
DBE
X
Name
Name
Power Management mode registers PMMR0
Power Management mode registers PMMR2
0
0
0 = on Cntl0 input to the PLD AND Array is connected.
1 = off Cntl0 input to PLD AND Array is disconnected, saving power.
0 = on Cntl1 input to the PLD AND Array is connected.
1 = off Cntl1 input to PLD AND Array is disconnected, saving power.
0 = on Cntl2 input to the PLD AND Array is connected.
1 = off Cntl2 input to PLD AND Array is disconnected, saving power.
0 = on ALE input to the PLD AND Array is connected.
1 = off ALE input to PLD AND Array is disconnected, saving power.
0 = on DBE input to the PLD AND Array is connected.
1 = off DBE input to PLD AND Array is disconnected, saving power.
0
0 =
on
1 =
off
0 =
on
1 =
off
0
0
CLKIN (PD1) input to the PLD AND Array is connected. Every change of CLKIN
(PD1) Powers-up the PLD when Turbo Bit is ’0.’
CLKIN (PD1) input to PLD AND Array is disconnected, saving power.
CLKIN (PD1) input to the PLD macrocells is connected.
CLKIN (PD1) input to PLD macrocells is disconnected, saving power.
Not used, and should be set to zero.
Not used, and should be set to zero.
Not used, and should be set to zero.
Not used, and should be set to zero.
Not used, and should be set to zero.
Doc ID 7833 Rev 7
Description
Description
(1)
(1)
(continued)
Power management
83/128