MT48H32M16LFBF-75 IT:B Micron Technology Inc, MT48H32M16LFBF-75 IT:B Datasheet - Page 38

MT48H32M16LFBF-75 IT:B

Manufacturer Part Number
MT48H32M16LFBF-75 IT:B
Description
Manufacturer
Micron Technology Inc
Type
SDRAMr
Datasheet

Specifications of MT48H32M16LFBF-75 IT:B

Organization
32Mx16
Density
512Mb
Address Bus
15b
Access Time (max)
8/5.4ns
Maximum Clock Rate
133MHz
Operating Supply Voltage (typ)
1.8V
Package Type
VFBGA
Operating Temp Range
-40C to 85C
Operating Supply Voltage (max)
1.95V
Operating Supply Voltage (min)
1.7V
Supply Current
90mA
Pin Count
54
Mounting
Surface Mount
Operating Temperature Classification
Industrial
Lead Free Status / Rohs Status
Compliant
Initialization
PDF: 09005aef82ea3742
512mb_mobile_sdram_y47m.pdf – Rev. H 12/09 EN
Low-power SDRAM devices must be powered up and initialized in a predefined man-
ner. Using initialization procedures other than those specified may result in undefined
operation. After power is simultaneously applied to V
ble (a stable clock is defined as a signal cycling within timing constraints specified for
the clock ball), the device requires a 100μs delay prior to issuing any command other
than a COMMAND INHIBIT or NOP. Starting at some point during this 100μs period
and continuing at least through the end of this period, COMMAND INHIBIT or NOP
commands should be applied.
After the 100μs delay is satisfied by issuing at least one COMMAND INHIBIT or NOP
command, a PRECHARGE command must be issued. All banks must then be pre-
charged, which places the device in the all banks idle state.
When in the idle state, two AUTO REFRESH cycles must be performed. After the AUTO
REFRESH cycles are complete, the device is ready for mode register programming. Be-
cause the mode register powers up in an unknown state, it should be loaded prior to
issuing any operational command.
512Mb: 32 Meg x 16, 16 Meg x 32 Mobile SDRAM
38
Micron Technology, Inc. reserves the right to change products or specifications without notice.
DD
and V
© 2007 Micron Technology, Inc. All rights reserved.
DDQ
and the clock is sta-
Initialization

Related parts for MT48H32M16LFBF-75 IT:B