SAF1761BE/V1,557 NXP Semiconductors, SAF1761BE/V1,557 Datasheet - Page 59

• Manufacturer Part Number: SAF1761BE/V1,557
• Manufacturer: NXP Semiconductors

Specifications of SAF1761BE/V1,557

• Lead Free Status / Rohs Status: Compliant

NXP Semiconductors
SAF1761_1
Product data sheet
8.5.1 High-speed bulk IN and OUT
Table 63
Transfer Descriptor (TD).
2. If the current PTD is active and not done, perform the transaction.
3. Follow the NextPTD pointer as specified in bits 4 to 0 of DW4.
4. If combined with LastPTD, the LastPTD setting must be at a higher address than the
5. If combined with skip, the skip must not be set (logically) on the same position
6. If PTD is set for skip, it will be neglected and the next vertical PTD will be considered.
7. If the skipped PTD already has a setting including a NextPTD pointer that will not be
Fig 12. NextPTD traversal rule
NextPTD specified. Both have to be set in a logical manner.
corresponding to NextPTD, pointed by the NextPTD pointer.
taken into consideration, the behavior will be just as described in the preceding step.
CHECK FOR
shows the bit allocation of the high-speed bulk IN and OUT, asynchronous
VALID AND
ACTIVE BIT
no
SET?
Rev. 01 — 18 November 2009
yes
no
FOLLOW NEXT
PTD POINTED
EXECUTION
BY NEXTPTD
START PTD
START PTD
POINTER
SCHEDULE
SKIPPED?
PTD
yes
Hi-Speed USB OTG controller
VERTICAL
NEXTPTD
POINTER
yes
GO TO
IS PTD
NULL?
SAF1761
© NXP B.V. 2009. All rights reserved.
no
004aaa883
59 of 166