D12363VTE33 Renesas Electronics America, D12363VTE33 Datasheet - Page 474

• Manufacturer Part Number: D12363VTE33
• Description: MCU 3V 0K 120-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12363VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412363VTE33; HD6412363VTE33

Section 10 16-Bit Timer Pulse Unit (TPU)
Table 10.11 MD3 to MD0
Bit 3
MD3 *
0
1
Legend: ×: Don’t care
Notes: 1. MD3 is a reserved bit. The write value should always be 0.
10.3.3
TIOR registers control the TGR registers. The TPU has eight TIOR registers, two each for
channels 0 and 3, and one each for channels 1, 2, 4, and 5. Care is required since TIOR is affected
by the TMDR setting.
The initial output specified by TIOR is valid when the counter is stopped (the CST bit in TSTR is
cleared to 0). Note also that, in PWM mode 2, the output at the point at which the counter is
cleared to 0 is specified.
When TGRC or TGRD is designated for buffer operation, this setting is invalid and the register
operates as a buffer register.
Rev.6.00 Mar. 18, 2009 Page 414 of 980
REJ09B0050-0600
1
2. Phase counting mode cannot be set for channels 0 and 3. In this case, 0 should always
Bit 2
MD2 *
0
1
×
Timer I/O Control Register (TIOR)
be written to MD2.
2
Bit 1
MD1
0
1
0
1
×
Bit 0
MD0
0
1
0
1
0
1
0
1
×
Description
Normal operation
Reserved
PWM mode 1
PWM mode 2
Phase counting mode 1
Phase counting mode 2
Phase counting mode 3
Phase counting mode 4
—