D12363VTE33 Renesas Electronics America, D12363VTE33 Datasheet - Page 838

• Manufacturer Part Number: D12363VTE33
• Description: MCU 3V 0K 120-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12363VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412363VTE33; HD6412363VTE33

Section 20 Flash Memory (0.18-μm F-ZTAT Version)
20.5
There are two kinds of flash memory program/erase protection: hardware and software protection.
20.5.1
Programming and erasing of flash memory is forcibly disabled or suspended by hardware
protection. In this state, the downloading of a on-chip program and initialization are possible.
However, an activated program for programming or erasure cannot program or erase locations in a
user MAT, and the error in programming/erasing is reported in the parameter FPFR.
Table 20.9 Hardware Protection
Rev.6.00 Mar. 18, 2009 Page 778 of 980
REJ09B0050-0600
Item
Reset/standby
protection
Protection
Hardware Protection
Description
•
•
The program/erase interface
registers are initialized in the power-
on reset state (including a power-on
reset by the WDT) and standby
mode and the program/erase-
protected state is entered.
The reset state will not be entered
by a reset using the RES pin unless
the RES pin is held low until
oscillation has stabilized after power
is initially supplied. In the case of a
reset during operation, hold the RES
pin low for the RES pulse width that
is specified in the section on AC
characteristics section. If a reset is
input during programming or
erasure, data values in the flash
memory are not guaranteed. In this
case, execute erasure and then
execute program again.
Download
Function to be Protected
Program/Erase