D12363VTE33 Renesas Electronics America, D12363VTE33 Datasheet - Page 885

• Manufacturer Part Number: D12363VTE33
• Description: MCU 3V 0K 120-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12363VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412363VTE33; HD6412363VTE33

In module stop mode, only modules for which a stop setting has been made are halted
(reset or retained).
1. The active or halted state can be selected by means of the MSTP0 bit in MSTPCR.
2. TDR, SSR, and RDR are halted (reset) and other registers are halted (retained).
3. BC2 to BC0 are halted (reset) and other registers are halted (retained).
Notes: 1. NMI, IRQ0 to IRQ7, 8-bit timer interrupts, watchdog timer interrupts.
• From any state, a transition to hardware standby mode occurs when STBY is driven low.
• From any state except hardware standby mode, a transition to the reset state occurs when RES
is driven low.
: Transition after exception handling
2. NMI, IRQ0 to IRQ7
Program execution state
(8-bit timer interrupts are valid when MSTP0 = 0.)
(IRQ0 to IRQ7 are valid when the corresponding bit in SSIER is 1.)
SCK2 to
SCK0 = 0
(Internal clock is PLL
circuit output clock)
High-speel mode
Clock division
Reset state
mode
RES pin = high
SCK2 to
SCK0 ≠ 0
Figure 23.1 Mode Transitions
STBY pin = high
RES pin = low
SLEEP
instruction
Any interrupt
SLEEP
instruction
Interrupt
External
interrupt
SLEEP
instruction
: Power- down mode
*2
*1
Rev.6.00 Mar. 18, 2009 Page 825 of 980
MSTPCR =
H'FFFF (H'FFFE),
EXMSTPCR = H'FFFF,
SSBY = 0
module-clocks-stop
Program-halted state
STBY pin = low
SSBY = 0
SSBY = 1
standby mode
standby mode
Section 23 Power-Down Modes
Sleep mode
Hardware
Software
mode
All
REJ09B0050-0600