M306N4FGTFP Renesas Electronics America, M306N4FGTFP Datasheet - Page 256

IC M16C MCU FLASH 100QFP

M306N4FGTFP

Manufacturer Part Number
M306N4FGTFP
Description
IC M16C MCU FLASH 100QFP
Manufacturer
Renesas Electronics America
Series
M16C™ M16C/6Nr
Datasheets

Specifications of M306N4FGTFP

Core Processor
M16C/60
Core Size
16-Bit
Speed
20MHz
Connectivity
CAN, I²C, IEBus, SIO, UART/USART
Peripherals
DMA, WDT
Number Of I /o
85
Program Memory Size
256KB (256K x 8)
Program Memory Type
FLASH
Ram Size
10K x 8
Voltage - Supply (vcc/vdd)
4.2 V ~ 5.5 V
Data Converters
A/D 26x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
100-QFP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
M306N4FGTFP
Manufacturer:
TI
Quantity:
3 001
Part Number:
M306N4FGTFP
Manufacturer:
RENESAS
Quantity:
36
Part Number:
M306N4FGTFP
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
M306N4FGTFP
Manufacturer:
RENESAS/瑞萨
Quantity:
20 000
Part Number:
M306N4FGTFP#UKJ
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
M306N4FGTFP#UKJ
Manufacturer:
RENESAS/瑞萨
Quantity:
20 000
M16C/6N Group (M16C/6N4)
Rev.2.40
REJ09B0009-0240
19.11 Basic CAN Mode
Figure 19.19 Slots 14 and 15 Operation in Basic CAN Mode
When the BasicCAN bit in the CiCTLR register (i = 0, 1) is set to 1 (Basic CAN mode enabled), slots 14 and
15 correspond to Basic CAN mode. In normal operation mode, each slot can handle only one type message
at a time, either a data frame or a remote frame by setting CiMCTLj regisrer (j = 0 to 15). However, in Basic
CAN mode, slots 14 and 15 can receive both types of message at the same time.
When slots 14 and 15 are defined as reception slots in Basic CAN mode, received messages are stored in
slots 14 and 15 alternately.
Which type of message has been received can be checked by the RemActive bit in the CiMCTLj register.
Figure 19.19 shows the Slots 14 and 15 Operation in Basic CAN Mode.
When using Basic CAN mode, note the following points.
(1) Setting of Basic CAN mode has to be done in CAN reset/initialization mode.
(2) Select the same ID for slots 14 and 15. Also, setting of registers CiLMAR and CiLMBR has to be the
(3) Define slots 14 and 15 as reception slot only.
(4) There is no protection available against message overwrite. A message can be overwritten by a new
(5) Slots 0 to 13 can be used in the same way as in normal CAN operation mode.
same.
message.
Apr 14, 2006
Slot 14
Slot 15
page 232 of 376
Locked (empty)
Msg n
Empty
Locked (empty)
Msg n
Msg n+1
Locked
Msg n + 1
(Msg n)
Msg n+2
Msg n+2 (Msg n lost)
Locked (Msg n+1)
19. CAN Module

Related parts for M306N4FGTFP