UPD78F0513AMC-GAA-AX Renesas Electronics America, UPD78F0513AMC-GAA-AX Datasheet - Page 351

• Manufacturer Part Number: UPD78F0513AMC-GAA-AX
• Description: MCU 8BIT 38PIN SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2r

Specifications of UPD78F0513AMC-GAA-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 31
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2
(2) 8-bit timer mode control register 5n (TMC5n)
R01UH0008EJ0401 Rev.4.01
Jul 15, 2010
TMC5n is a register that performs the following five types of settings.
<1> 8-bit timer counter 5n (TM5n) count operation control
<2> 8-bit timer counter 5n (TM5n) operating mode selection
<3> Timer output F/F (flip flop) status setting
<4> Active level selection in timer F/F control or PWM (free-running) mode.
<5> Timer output control
TMC5n can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
Remark n = 0, 1
Note Bits 2 and 3 are write-only.
(Cautions and Remarks are listed on the next page.)
Address: FF6BH
Symbol
TMC50
TMC506
TMC501
TOE50
TCE50
TCE50
LVS50
<7>
0
1
0
1
0
0
1
1
0
1
0
1
After reset: 00H
Figure 8-7. Format of 8-Bit Timer Mode Control Register 50 (TMC50)
After clearing to 0, count operation disabled (counter stopped)
Count operation start
Mode in which clear & start occurs on a match between TM50 and CR50
PWM (free-running) mode
Inversion operation disabled
Inversion operation enabled
Output disabled (TO50 output is low level)
Output enabled
TMC506
LVR50
6
0
1
0
1
In other modes (TMC506 = 0)
R/W
No change
Timer output F/F clear (0) (default value of TO50 output: low level)
Timer output F/F set (1) (default value of TO50 output: high level)
Setting prohibited
Timer F/F control
Note
5
0
CHAPTER 8 8-BIT TIMER/EVENT COUNTERS 50 AND 51
TM50 operating mode selection
TM50 count operation control
4
0
Timer output control
Timer output F/F status setting
LVS50
<3>
Active-high
Active-low
In PWM mode (TMC506 = 1)
LVR50
<2>
Active level selection
TMC501
1
TOE50
<0>
351