UPD78F0513AMC-GAA-AX Renesas Electronics America, UPD78F0513AMC-GAA-AX Datasheet - Page 672

• Manufacturer Part Number: UPD78F0513AMC-GAA-AX
• Description: MCU 8BIT 38PIN SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2r

Specifications of UPD78F0513AMC-GAA-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 31
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2
(2) HALT mode release
R01UH0008EJ0401 Rev.4.01
Jul 15, 2010
The HALT mode can be released by the following two sources.
(a) Release by unmasked interrupt request
internal high-speed oscillation clock,
When an unmasked interrupt request is generated, the HALT mode is released. If interrupt acknowledgment is
enabled, vectored interrupt servicing is carried out. If interrupt acknowledgment is disabled, the next address
instruction is executed.
Notes 1. The wait time is as follows:
Remark The broken lines indicate the case when the interrupt request which has released the standby mode is
High-speed system clock,
or subsystem clock
2. The 78K0/KB2 is not provided with a subsystem clock.
acknowledged.
• When vectored interrupt servicing is carried out:
• When vectored interrupt servicing is not carried out: 4 or 5 clocks
Status of CPU
release signal
Figure 22-3. HALT Mode Release by Interrupt Request Generation
Standby
Note 2
Normal operation
instruction
HALT
HALT mode
Interrupt
request
Oscillation
11 or 12 clocks
CHAPTER 22 STANDBY FUNCTION
Wait
Note 1
Normal operation
672