XC68HC12A0CPV8 Freescale Semiconductor, XC68HC12A0CPV8 Datasheet - Page 203

• Manufacturer Part Number: XC68HC12A0CPV8
• Description: IC, 16BIT MCU, 68HC12, 8MHZ, TQFP-112
• Manufacturer: Freescale Semiconductor

Specifications of XC68HC12A0CPV8

• Controller Family/series: 68HC12
• No. Of I/o's: 68
• Eeprom Memory Size: 1KB
• Ram Memory Size: 2KB
• Cpu Speed: 8MHz
• No. Of Timers: 1
• Core Size: 16 Bit
• Program Memory Size: 60KB
• Peripherals: ADC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.5.3.2 General Specifications
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
The following limitations apply to every system:
3. Within this range, choose the EXTAL–VSS capacitance closest to
4. If the ideal component is between two valid component values (the
5. Choose the size of the XTAL–VSS capacitance equal to
6. If the frequency of the crystal falls between listed values,
7. The maximum allowed capacitor is the highest listed component,
•
•
•
variation or particle contamination).
(C
maximum ESR is sufficient for both component values), then
choose the component with the highest maximum ESR or choose
an available component between the two listed values.
EXTAL–VSS capacitance.
determine the appropriate component for the listed frequency
values on either side and extrapolate.
and the minimum allowed capacitor is the lowest listed
component. ‘NA’ or ‘Not Allowed’ means the listed component is
not valid or allowed for the given frequency, Shunt Capacitance,
and VDDPLL setting.
Ceramic resonators with integrated components must have the
integrated components accounted for in the total component
value.
Series cut resonators should not be used. Use parallel cut instead.
The Load Capacitance should be 12pF or higher, preferably
greater than 15pF.
EXTAL–VSS
= 2*CL – 10pF).
Oscillator
MC68HC912D60P Pierce Oscillator Specification
Technical Data
Oscillator
203