LAN9311-NZW Standard Microsystems (SMSC), LAN9311-NZW Datasheet - Page 131

• Manufacturer Part Number: LAN9311-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
9.8.6.2
TX Command 'A'
Buffer End Alignment = 0
Data Start Offset = 6
First Segment = 1
Last Segment = 1
Buffer Size =183
TX Command 'B'
Packet Length = 183
TX Example 2
In this example, a single 183-Byte Ethernet packet will be transmitted. This packet is in a single buffer
as follows:
Figure 9.6
to the TX Data FIFO. Note that the packet resides in a single TX Buffer, therefore both the FS and LS
bits are set in TX command ‘A’.
2-Byte “Data Start Offset”
183-Bytes of payload data
4-Byte “Buffer End Alignment”
illustrates the TX command structure for this example, and also shows how data is passed
31
Data Written to the
TX Data FIFO Port
6-Byte Data Start Offset
183-Byte Payload Data
Memory Mapped
TX Command 'A'
TX Command 'B'
3B End Padding
Figure 9.6 TX Example 2
DATASHEET
131
0
NOTE: Extra bytes between buffers
are not transmitted
Data Passed to the
183-Byte Payload Data
TX Data FIFO
TX Command 'A'
TX Command 'B'
Revision 1.7 (06-29-10)