LAN9311-NZW Standard Microsystems (SMSC), LAN9311-NZW Datasheet - Page 266

• Manufacturer Part Number: LAN9311-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
BITS
0
Device Ready (READY)
When set, this bit indicates that the LAN9311/LAN9311i is ready to be
accessed. Upon power-up, nRST reset, soft reset, or digital reset, the host
processor may interrogate this field as an indication that the
LAN9311/LAN9311i has stabilized and is fully active.
This bit can cause an interrupt if enabled.
Note:
Note:
With the exception of the HW_CFG, PMT_CTRL, BYTE_TEST, and
RESET_CTL registers, read access to any internal resources is
forbidden while the READY bit is cleared. Writes to any address
are invalid until this bit is set.
This bit is identical to bit 27 of the
(HW_CFG)
DESCRIPTION
DATASHEET
Hardware Configuration Register
266
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
TYPE
SMSC LAN9311/LAN9311i
RO
DEFAULT
Datasheet
0b