LAN9311-NZW Standard Microsystems (SMSC), LAN9311-NZW Datasheet - Page 236

• Manufacturer Part Number: LAN9311-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
14.2.6.4
BITS
31:0
Switch CSR Data (CSR_DATA)
This field contains the value read from or written to the Switch Fabric CSR.
The Switch Fabric CSR is selected via the
bits of the
(SWITCH_CSR_CMD).
Upon a read, the value returned depends on the R/nW bit in the
Fabric CSR Interface Command Register
set, the data is from the switch fabric. If R/nW is cleared, the data is the
value that was last written into this register.
Switch Fabric CSR Interface Data Register (SWITCH_CSR_DATA)
This read/write register is used in conjunction with the
(SWITCH_CSR_CMD)
Section 14.5, "Switch Fabric Control and Status Registers," on page 309
indirectly accessible via this register.
Switch Fabric CSR Interface Command Register
Offset:
to perform read and write operations with the Switch Fabric CSR’s. Refer to
1ACh
DESCRIPTION
DATASHEET
(SWITCH_CSR_CMD). If R/nW is
CSR Address (CSR_ADDR[15:0])
236
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
Switch Fabric CSR Interface Command Register
Switch
32 bits
for details on the registers
TYPE
R/W
SMSC LAN9311/LAN9311i
00000000h
DEFAULT
Datasheet