LAN9311-NZW Standard Microsystems (SMSC), LAN9311-NZW Datasheet - Page 48

• Manufacturer Part Number: LAN9311-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
4.3.2
The Port 1 & 2 PHY energy-detect events are capable of asserting the PME output by additionally
setting the PME_EN and ED_EN2 (Port 2 PHY) or ED_EN1 (Port 1 PHY) bits of the
Management Control Register
Host MAC Power Management
The Host MAC provides wake-up frame and magic packet detection modes. When enabled in the
MAC Wake-up Control and Status Register (HMAC_WUCSR)
and the MPEN bit for magic packets), detection of wake-up frames or magic packets causes the WUFR
and MPR bits of the HMAC_WUCSR register to set, respectively. If either of the WUFR and MPR bits
are set, the WOL_STS bit of the
events can enable PME output assertion by additionally setting the PME_EN bit of the
Management Control Register
The IRQ interrupt output can be triggered by a wake-up frame or magic packet as described in
5.2.6, "Power Management Interrupts," on page
Refer to
Detection," on page 119
Section 9.5, "Wake-up Frame Detection," on page 117
for additional details on these features.
(PMT_CTRL).
(PMT_CTRL).
Power Management Control Register (PMT_CTRL)
DATASHEET
48
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
53.
(via the WUEN bit for wake-up frames,
and
Section 9.5.1, "Magic Packet
SMSC LAN9311/LAN9311i
will be set. These
Datasheet
Section
Power
Power
Host