LAN9311-NZW Standard Microsystems (SMSC), LAN9311-NZW Datasheet - Page 336

• Manufacturer Part Number: LAN9311-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
14.5.2.13
BITS
31:0
RX Multicast
Count of good packets (proper length and free of errors), including MAC
control frames, that have a multicast destination address (not including
broadcasts).
Note:
Port x MAC Receive Multicast Count Register (MAC_RX_MULCST_CNT_x)
This register provides a counter of valid received packets with a multicast destination address. The
counter is cleared upon being read.
Note: A bad packet is one that has a FCS or Symbol error.
This counter will stop at its maximum value of FFFF_FFFFh.
Minimum rollover time at 100Mbps is approximately 481 hours.
Register #:
Port0: 041Ah
Port1: 081Ah
Port2: 0C1Ah
DESCRIPTION
DATASHEET
336
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
SMSC LAN9311/LAN9311i
RC
00000000h
DEFAULT
Datasheet