PIC24FJ64GB002-I/SS Microchip Technology, PIC24FJ64GB002-I/SS Datasheet - Page 157

16-bit, 16 MIPS, 64KB Flash, 8KB RAM, Nanowatt XLP, USB OTG 28 SSOP .209in TUBE

PIC24FJ64GB002-I/SS

Manufacturer Part Number
PIC24FJ64GB002-I/SS
Description
16-bit, 16 MIPS, 64KB Flash, 8KB RAM, Nanowatt XLP, USB OTG 28 SSOP .209in TUBE
Manufacturer
Microchip Technology

Specifications of PIC24FJ64GB002-I/SS

Processor Series
PIC24
Core
PIC24F
Data Bus Width
16 bit
Program Memory Type
Flash
Program Memory Size
64 KB
Data Ram Size
8192 B
Interface Type
I2C, SPI, UART
Maximum Clock Frequency
32 MHz
Number Of Programmable I/os
21
Number Of Timers
5
Operating Supply Voltage
2 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
SSOP-28
Development Tools By Supplier
MPLAB Integrated Development Environment
Minimum Operating Temperature
- 40 C
Operating Temperature Range
- 40 C to + 85 C
Supply Current (max)
300 mA
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC24FJ64GB002-I/SS
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
Part Number:
PIC24FJ64GB002-I/SS
0
13.0
Devices in the PIC24FJ64GB004 family all feature
5 independent input capture modules. Each of the
modules offers a wide range of configuration and
operating options for capturing external pulse events
and generating interrupts.
Key features of the input capture module include:
• Hardware-configurable for 32-bit operation in all
• Synchronous and Trigger modes of output
• A 4-level FIFO buffer for capturing and holding
• Configurable interrupt generation
• Up to 6 clock sources available for each module,
The module is controlled through two registers:
ICxCON1 (Register 13-1) and ICxCON2 (Register 13-2).
A general block diagram of the module is shown in
Figure 13-1.
FIGURE 13-1:
 2010 Microchip Technology Inc.
Note:
modes by cascading two adjacent modules
compare operation, with up to 20 user-selectable
trigger/sync sources available
timer values for several events
driving a separate internal 16-bit counter
Sync Sources
Note 1: The ICx inputs must be assigned to an available RPn pin before use. Please see Section 10.4 “Peripheral
Trigger and
IC Clock
Sources
ICx Pin
INPUT CAPTURE WITH
DEDICATED TIMERS
Pin Select (PPS)” for more information.
This data sheet summarizes the features
of this group of PIC24F devices. It is not
intended to be a comprehensive reference
source. For more information, refer to the
“PIC24F
Section
Dedicated Timer” (DS39722).
(1)
ICTSEL<2:0>
Trigger and
Sync Logic
Prescaler
Family
34.
INPUT CAPTURE BLOCK DIAGRAM
Counter
1:1/4/16
Select
Clock
“Input
Reference
Increment
Reset
Capture
ICM<2:0>
SYNCSEL<4:0>
Trigger
Clock Synchronizer
Edge Detect Logic
Manual”,
ICxTMR
and
with
PIC24FJ64GB004 FAMILY
13.1
13.1.1
By default, the input capture module operates in a
free-running mode. The internal 16-bit counter,
ICxTMR, counts up continuously, wrapping around
from FFFFh to 0000h on each overflow, with its period
synchronized to the selected external clock source.
When a capture event occurs, the current 16-bit value
of the internal counter is written to the FIFO buffer.
In Synchronous mode, the module begins capturing
events on the ICx pin as soon as its selected clock
source is enabled. Whenever an event occurs on the
selected sync source, the internal counter is reset. In
Trigger mode, the module waits for a Sync event from
another internal module to occur before allowing the
internal counter to run.
Standard, free-running operation is selected by setting
the SYNCSEL bits to ‘00000’ and clearing the ICTRIG
bit (ICxCON2<7>). Synchronous and Trigger modes
are selected any time the SYNCSEL bits are set to any
value except ‘00000’. The ICTRIG bit selects either
Synchronous or Trigger mode; setting the bit selects
Trigger mode operation. In both modes, the SYNCSEL
bits determine the sync/trigger source.
When the SYNCSEL bits are set to ‘00000’ and
ICTRIG is set, the module operates in Software Trigger
mode. In this case, capture operations are started by
manually setting the TRIGSTAT bit (ICxCON2<6>).
16
General Operating Modes
SYNCHRONOUS AND TRIGGER
MODES
4-Level FIFO Buffer
ICOV, ICBNE
Event and
ICI<1:0>
Interrupt
ICxBUF
Logic
Set ICxIF
DS39940D-page 157
16
System Bus
16

Related parts for PIC24FJ64GB002-I/SS