ADWPCIXRSKU20 Intel, ADWPCIXRSKU20 Datasheet - Page 167

• Manufacturer Part Number: ADWPCIXRSKU20
• Manufacturer: Intel

Specifications of ADWPCIXRSKU20

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Intel® Server Board SE7320VP2
7.6.2
The jumper block J1A4, located just to the left of the Serial A port header, is used to select
which BIOS image the system will boot using. Pin 1 on the jumper is denoted by “*”.
7.6.3
The jumper block J8A3, located directly behind the external low-profile RJ45 serial port, is used
to configure either a DSR or a DCD signal to the connector. See Section 3.4.9.2.3 for additional
information on serial port usage.
Revision 2.1
Pins
1-2
2-3
What happens at system reset…
System is configured for normal operation
Force BIOS to lower bank
BIOS Select Jumper
External RJ45 Serial Port Jumper Block
Table 102. BIOS Select Jumper [J1A4]
Figure 19. BIOS Select Jumper (J1A4)
Intel order number C91056-002
Connectors and Jumper Blocks
167