ADWPCIXRSKU20 Intel, ADWPCIXRSKU20 Datasheet - Page 54

• Manufacturer Part Number: ADWPCIXRSKU20
• Manufacturer: Intel

Specifications of ADWPCIXRSKU20

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Functional Architecture
For server applications that require a DB9 serial connector, an 8-pin RJ45-to-DB9 adapter must
be used. The following table provides the pinout required for the adapter to provide RS232
support. A standard DH10-to-DB 9 cable and 8-pin RJ45 to DB9 DCD and DSR adapters are
available from Intel in the Serial Port Accessory Kit, product code: AXXRJ45DB92.
Note: The RJ45-to-DB9 adapter should match the configuration of the serial device used. One
of two pinout configurations is used, depending on whether the serial device requires a DSR or
DCD signal. The final adapter configuration should also match the desired pinout of the RJ45
connector, as it can also be configured to support either DSR or DCD.
3.4.9.3
The BIOS supports removable media devices, including 1.44MB floppy removable media
devices and optical devices such as a CD-ROM drive or a read-only DVD-ROM drive. The BIOS
supports booting from USB mass storage devices connected to the chassis USB port, such as a
USB key device.
The BIOS supports USB 2.0 media storage devices that are backward compatible to the USB
1.1 specification.
3.4.9.4
The floppy disk controller (FDC) in the SIO is functionally compatible with floppy disk controllers
in the DP8473 and N844077. All FDC functions are integrated into the SIO including analog
data separator and 16-byte FIFO. The Server Board SE7320VP2 provides two separate
interfaces for the floppy disk controller. The first is a SSI compliant 36-pin connector, and the
second is routed through the high-density 100-pin floppy / front panel / IDE connector.
Note: Using both interfaces in a common configuration is not supported.
54
1-3
2-4
Pins
Removable Media Drives
Floppy Disk Support
Serial port is configured for DCD to DTR
Serial port is configured for DSR to DTR (default)
1
2
3
4
5
6
7
8
RJ45
Request to Send
Data Terminal Ready
Transmitted Data
Signal Ground
Ring Indicator
Received Data
DCD or DSR
Clear To Send
Table 17. Rear Serial B Port Adapter Pinout
Signal
Intel order number C91056-002
What happens at system reset…
Abbreviation
RTS
DTR
TD
SGND
RI
RD
DCD/DSR
CTS
7
4
3
5
9
2
1 or 6 (see note)
8
Intel® Server Board SE7320VP2
DB9
Revision 2.1