CP2201-GM Silicon Laboratories Inc, CP2201-GM Datasheet - Page 93

• Manufacturer Part Number: CP2201-GM
• Description: IC ETH CTRLR SNGL-CHIP 28QFN
• Manufacturer: Silicon Laboratories Inc

Specifications of CP2201-GM

• Package / Case: 48-TQFP, 48-VQFP
• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: Parallel/Serial
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 75mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Ethernet Connection Type: 1000BASE-T or 100BASE-T or 10BASE-T
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Product: Ethernet Controllers
• Standard Supported: IEEE 802.3
• Data Rate: 10 Mbps or 100 Mbps or 1000 Mbps
• Maximum Operating Temperature: + 85 C
• No. Of Ports: 1
• Ethernet Type: IEEE 802.3
• Interface Type: Parallel
• Supply Current: 60mA
• Supply Voltage Range: 3.1V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1326 - KIT REF DESIGN PWR OVER ETHERNET336-1316 - KIT EVAL FOR CP2201 ETH CTRLR
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1313

Table 22. 10BASE-T Interface DC Electrical Characteristics
V
Transmitter Differential Output Voltage (Peak)
Receiver Normal Squelch Level (Peak)
Receiver Low Squelch Level
Physical Layer Startup Time
DD
Note: The Auto-Negotiation states and error types are described in Clause 28 of IEEE 802.3.
Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
LGCILF
= 3.1 to 3.6 V, –40 to +85 °C unless otherwise specified.
Bit7
R
LGCILF: Link Good Check Incompatible Link Failure
0: Normal operation.
1: Auto-negotiation failed due to an incompatible link.
LGCLSF: Link Good Check Line Status Failure
0: Normal operation.
1. Auto-negotiation failed due to a link fault.
AKDLF: Acknowledge Detect Link Failure
0: Normal operation.
1: Auto-negotiation failed due to lack of reception of fast link pulses.
AKDAMF: Acknowledge Detect Acknowledge Match Failure
0: Normal operation.
1: Auto-negotiation failed due to reception of a link code word with the ACK bit cleared.
AKDCMF: Acknowledge Detect Consistency Match Failure
0: Normal operation.
1: Auto-negotiation failed due to reception of inconsistent link code words.
ABDLF: Ability Detect Link Failure
0: Normal operation.
1: Auto-negotiation failed due to lack of reception of fast link pulses.
ABDAKMF: Ability Detect Acknowledge Match Failure
0: Normal operation.
1: Auto-negotiation failed due to the reception of link code word(s) with the ACK bit set.
ABDABMF: Ability Detect Ability Match Failure
0: Normal operation.
1: Auto-negotiation failed due to the lack of reception of three consecutive link code words.
LGCLSF
Bit6
Parameters
R
Register 72. PHYSTA: Physical Layer Status Register
AKDLF
Bit5
R
AKDAMF AKDCMF
Bit4
R
Conditions
Bit3
R
Rev. 1.0
ABDLF
Bit2
R
ABDAKMF ABDABMF 00000000
Min
2.2
—
—
—
Bit1
R
Typ
585
330
2.5
1
Bit0
R
CP2200/1
Max
Reset Value
2.8
—
—
—
Address:
0x80
UNITS
mV
mV
ms
V
93