r4f2426 Renesas Electronics Corporation., r4f2426 Datasheet - Page 214

no-image

r4f2426

Manufacturer Part Number
r4f2426
Description
16-bit Single-chip Microcomputer H8s Family / H8s/2400 Series
Manufacturer
Renesas Electronics Corporation.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
r4f24268NVFQV
Manufacturer:
Renesas Electronics America
Quantity:
135
Part Number:
r4f24268NVFQV
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
r4f24268NVRFQV
Manufacturer:
Renesas Electronics America
Quantity:
135
Part Number:
r4f24268NVRFQV
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
r4f24268NVZFQV
Manufacturer:
REA
Quantity:
150
Part Number:
r4f24268NVZFQV
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
r4f24269NVFQV
Manufacturer:
Renesas Electronics America
Quantity:
135
Part Number:
r4f24269NVFQV
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Section 6 Bus Controller (BSC)
(3)
In externally expanded mode, areas 2 to 5 are all external address space.
When area 2 to 5 external space is accessed, signals CS2 to CS5 can be output.
The basic bus interface, DRAM interface, or synchronous DRAM interface can be selected for the
memory interface of areas 2 to 5. With the DRAM interface, signals CS2 and CS5 are used as
RAS signals.
If areas 2 to 5 are designated as continuous DRAM space, large-capacity (e.g. 64-Mbit) DRAM
can be connected. In this case, the CS2 signal is used as the RAS signal for the continuous DRAM
space.
If areas 2 to 5 are designated as continuous synchronous DRAM space, large-capacity (e.g. 64-
Mbit) synchronous DRAM can be connected. In this case, the CS2, CS3, CS4, and CS5 pins are
used as the RAS, CAS, WE, and CLK signals for the continuous synchronous DRAM space. The
OE pin is used as the CKE signal.
(4)
In externally expanded mode, all of area 6 is external space.
When area 6 external space is accessed, the CS6 signal can be output.
Either the basic bus interface or address/data multiplexed I/O interface can be used for the
memory interface of area 6.
(5)
Area 7 includes the on-chip RAM and internal/O registers. In externally expanded mode, the space
excluding the on-chip RAM and internal I/O registers is external address space. The on-chip RAM
is enabled when the RAME bit is set to 1 in the system control register (SYSCR); when the
RAME bit is cleared to 0, the on-chip RAM is disabled and the corresponding addresses are in
external address space.
When area 7 external address space is accessed, the CS7 signal can be output.
Either the basic bus interface or address/data multiplexed I/O interface can be used for the
memory interface of area 7.
Rev. 1.00 Sep. 19, 2008 Page 186 of 1270
REJ09B0466-0100
Areas 2 to 5
Area 6
Area 7

Related parts for r4f2426