h8s-2646 Renesas Electronics Corporation., h8s-2646 Datasheet - Page 46

no-image

h8s-2646

Manufacturer Part Number
h8s-2646
Description
Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
Manufacturer
Renesas Electronics Corporation.
Datasheet
Section 1 Overview
1.3.3
Table 1.3 outlines the pin functions of the H8S/2646.
Table 1.3
Rev. 5.00 Sep 22, 2005 page 20 of 1136
REJ09B0257-0500
Type
Power
Clock
Pin Functions
Pin Functions
Symbol
Vcc
PWMVcc
LPVcc
V1, V2, V3
Vss
PWMVss
VCL
PLLVss
PLLCAP
XTAL
EXTAL
I/O
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Name and Function
Power supply: For connection to the power supply.
All Vcc pins should be connected to the system power
supply.
PWM port power supply: Power supply pin for port H,
port J, and the motor control PWM timer output
Port power supply: Power supply pin for ports A, B, C,
D, E, and part of port F (PF2 and PF4 to PF6)
LCD power supply: Power supply pin for LCD
controller/driver. There is an on-chip power supply
division resistor, so this pin is normally left open.
Power supply conditions: LPVcc ≥ V1 ≥ V2 ≥ V3 ≥ Vss
Ground: For connection to ground (0 V). All Vss pins
should be connected to the system power supply (0 V).
Ground: Power supply pin for port H, port J, and the
motor control PWM timer output. Connect all pins to
the system power supply (0 V)
On-chip step-down power supply pin: Pin for
connecting the on-chip step-down power supply to a
capacitor for voltage stabilization. Connect to Vss via a
0.1 µF capacitor (which should be located near the
pin). Do not connect this pin to an external power
supply.
PLL ground: Ground for on-chip PLL oscillator.
PLL capacitance: External capacitance pin for on-chip
PLL oscillator.
Connects to a crystal oscillator.
See section 21, Clock Pulse Generator, for typical
connection diagrams for a crystal oscillator.
Use a crystal resonator for the system clock pulse
generator. External clock drive cannot be used.
Connects to a crystal oscillator.
See section 21, Clock Pulse Generator, for typical
connection diagrams for a crystal oscillator.

Related parts for h8s-2646