HD6417618 RENESAS [Renesas Technology Corp], HD6417618 Datasheet - Page 89

• Manufacturer Part Number: HD6417618
• Description: 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7618 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

3.3.4
When the U bit of the entry to be replaced in write-back mode is 1, the entry must be written back
to the external memory. To increase performance, the entry to be replaced is first transferred to the
write-back buffer and fetching of new entries to the cache takes priority over writing back to the
external memory. After the fetching of new entries to the cache completes, the write-back buffer
writes the entry back to the external memory. During the write-back cycles, the cache can be
accessed. The write-back buffer can hold one line of cache data (16 bytes) and its physical
address. Figure 3.3 shows the configuration of the write-back buffer.
3.3.5
Coherency between the cache and the external memory must be ensured by software. When
memory shared by this LSI and another device is allocated to a cacheable address space, invalidate
and write back the cache by accessing the memory-mapped cache, as required. Memory that is
shared by the CPU and E-DMAC of this LSI should also be handled in this way.
Write-Back Buffer
Coherency of Cache and External Memory
PA (31 to 4):
Longword 0 to 3:
PA (31 to 4)
Figure 3.3 Write-Back Buffer Configuration
Longword 0 Longword 1 Longword 2 Longword 3
Physical address to be written to external memory
One line of cache data to be written to external memory
Rev. 6.00 Jun. 12, 2007 Page 57 of 610
REJ09B0131-0600
Section 3 Cache