C8051F120-GQR Silicon Laboratories Inc, C8051F120-GQR Datasheet - Page 101

• Manufacturer Part Number: C8051F120-GQR
• Description: IC 8051 MCU FLASH 128K 100TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F12xr

Specifications of C8051F120-GQR

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 100MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 64
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8.25K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x8b, 8x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Processor Series: C8051F1x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 8.25 KB
• Interface Type: I2C, SMBus, SPI, UART
• Maximum Clock Frequency: 100 MHz
• Number Of Programmable I/os: 64
• Number Of Timers: 5
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F120DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 8 Channel
• On-chip Dac: 12 bit, 2 Channel
• For Use With: 336-1285 - KIT DEV EMBEDDED MODEM336-1284 - KIT DEV EMBEDDED ETHERNET336-1224 - DEVKIT-F120/21/22/23/24/25/26/27
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

7.3.2. Window Detector In Differential Mode
Figure 7.6 shows two example window comparisons for differential mode, with ADC2LT = 0x10 (+16d) and
ADC2GT = 0xFF (-1d). Notice that in Differential mode, the codes vary from -VREF to VREF*(127/128)
and are represented as 8-bit 2’s complement signed integers. In the left example, an AD2WINT interrupt
will be generated if the ADC2 conversion word (ADC2L) is within the range defined by ADC2GT and
ADC2LT (if 0xFF (-1d) < ADC2 < 0x0F (16d)). In the right example, an AD2WINT interrupt will be gener-
ated if ADC2 is outside of the range defined by ADC2GT and ADC2LT (if ADC2 < 0xFF (-1d) or ADC2 >
0x10 (+16d)).
(AIN2.x - AIN2.y)
REF x (127/128)
REF x (16/128)
REF x (-1/256)
Input Voltage
-REF
Figure 7.6. ADC2 Window Compare Examples, Differential Mode
0x80 (-128d)
0x7F (127d)
0x11 (17d)
0x10 (16d)
0x0F (15d)
0xFF (-1d)
0xFE (-2d)
0x00 (0d)
ADC2
not affected
not affected
AD2WINT
AD2WINT
ADC2GT
ADC2LT
AD2WINT=1
Rev. 1.4
(AIN2.x - AIN2.y)
REF x (127/128)
REF x (16/128)
REF x (-1/256)
C8051F120/1/2/3/4/5/6/7
Input Voltage
-REF
0x80 (-128d)
0x7F (127d)
0x0F (15d)
0x11 (17d)
0x10 (16d)
0xFF (-1d)
0xFE (-2d)
0x00 (0d)
ADC2
C8051F130/1/2/3
not affected
AD2WINT
ADC2GT
ADC2LT
AD2WINT=1
AD2WINT=1
101