C8051F120-GQR Silicon Laboratories Inc, C8051F120-GQR Datasheet - Page 182

no-image

C8051F120-GQR

Manufacturer Part Number
C8051F120-GQR
Description
IC 8051 MCU FLASH 128K 100TQFP
Manufacturer
Silicon Laboratories Inc
Series
C8051F12xr
Datasheets

Specifications of C8051F120-GQR

Core Processor
8051
Core Size
8-Bit
Speed
100MHz
Connectivity
EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Number Of I /o
64
Program Memory Size
128KB (128K x 8)
Program Memory Type
FLASH
Ram Size
8.25K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 8x8b, 8x12b; D/A 2x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
100-TQFP, 100-VQFP
Processor Series
C8051F1x
Core
8051
Data Bus Width
8 bit
Data Ram Size
8.25 KB
Interface Type
I2C, SMBus, SPI, UART
Maximum Clock Frequency
100 MHz
Number Of Programmable I/os
64
Number Of Timers
5
Operating Supply Voltage
2.7 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
PK51, CA51, A51, ULINK2
Development Tools By Supplier
C8051F120DK
Minimum Operating Temperature
- 40 C
On-chip Adc
12 bit, 8 Channel
On-chip Dac
12 bit, 2 Channel
For Use With
336-1285 - KIT DEV EMBEDDED MODEM336-1284 - KIT DEV EMBEDDED ETHERNET336-1224 - DEVKIT-F120/21/22/23/24/25/26/27
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
 Details

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
C8051F120-GQR
Manufacturer:
PEAK
Quantity:
5 000
Part Number:
C8051F120-GQR
Manufacturer:
SILICON
Quantity:
2
Part Number:
C8051F120-GQR
Manufacturer:
Silicon Laboratories Inc
Quantity:
10 000
Part Number:
C8051F120-GQR
Manufacturer:
SILICON LABS/芯科
Quantity:
20 000
Part Number:
C8051F120-GQR
0
C8051F120/1/2/3/4/5/6/7
C8051F130/1/2/3
182
Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
Bit7
R
-
Reserved.
CNVRSEF: Convert Start 0 Reset Source Enable and Flag
Write:
Read:
C0RSEF: Comparator0 Reset Enable and Flag.
Write:
Read:
SWRSF: Software Reset Force and Flag.
Write:
Read:
WDTRSF: Watchdog Timer Reset Flag.
MCDRSF: Missing Clock Detector Flag.
Write:
Read:
PORSF: Power-On Reset Flag.
Write: If the V
be written to select or de-select the V
0: De-select the V
1: Select the V
Important: At power-on, the V
enable pin (MONEN). The PORSF bit does not disable or enable the V
ply selects the V
Read: This bit is set whenever a power-on reset occurs. This may be due to a true power-on reset or a
V
reset.
0: Source of last reset was not a power-on or V
1: Source of last reset was a power-on or V
Note: When this flag is read as '1', all other reset flags are indeterminate.
PINRSF: HW Pin Reset Flag.
Write:
Read:
DD
CNVRSEF C0RSEF SWRSEF WDTRSF MCDRSF
monitor reset. In either case, data memory should be considered indeterminate following the
R/W
Bit6
0: CNVSTR0 is not a reset source.
1: CNVSTR0 is a reset source (active low).
0: Source of prior reset was not CNVSTR0.
1: Source of prior reset was CNVSTR0.
0: Comparator0 is not a reset source.
1: Comparator0 is a reset source (active low).
0: Source of last reset was not Comparator0.
1: Source of last reset was Comparator0.
0: No effect.
1: Forces an internal reset. RST pin is not effected.
0: Source of last reset was not a write to the SWRSF bit.
1: Source of last reset was a write to the SWRSF bit.
0: Source of last reset was not WDT timeout.
1: Source of last reset was WDT timeout.
0: Missing Clock Detector disabled.
1: Missing Clock Detector enabled; triggers a reset if a missing clock condition is detected.
0: Source of last reset was not a Missing Clock Detector timeout.
1: Source of last reset was a Missing Clock Detector timeout.
0: No effect.
1: Forces a Power-On Reset. RST is driven low.
0: Source of prior reset was not RST pin.
1: Source of prior reset was RST pin.
SFR Definition 13.2. RSTSRC: Reset Source
DD
DD
monitor circuitry is enabled (by tying the MONEN pin to a logic high state), this bit can
DD
DD
monitor as a reset source.
R/W
Bit5
monitor as a reset source.
monitor as a reset source.
R/W
Bit4
DD
monitor is enabled/disabled using the external V
DD
Rev. 1.4
monitor as a reset source.
DD
Bit3
R
monitor reset.
DD
monitor reset.
R/W
Bit2
PORSF
R/W
Bit1
DD
SFR Address:
monitor circuit. It sim-
PINRSF
SFR Page:
R/W
Bit0
DD
monitor
0xEF
0
00000000
Reset Value

Related parts for C8051F120-GQR