MC68HC908GP32CB Freescale Semiconductor, MC68HC908GP32CB Datasheet - Page 195

• Manufacturer Part Number: MC68HC908GP32CB
• Description: IC MCU 32K FLASH 8MHZ 42-SDIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GP32CB

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 42-DIP (0.600", 15.24mm)
• For Use With: M68EVB908GP32 - BOARD EVALUATION FOR HC908GP32
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Chapter 16
Timebase Module (TBM)
16.1 Introduction
This section describes the timebase module (TBM). The TBM will generate periodic interrupts at user
selectable rates using a counter clocked by the external crystal clock. This TBM version uses 15 divider
stages, eight of which are user selectable.
16.2 Features
Features of the TBM module include:
16.3 Functional Description
This module can generate a periodic interrupt by dividing the crystal frequency, CGMXCLK. The counter
is initialized to all 0s when TBON bit is cleared. The counter, shown in
the TBON bit is set. When the counter overflows at the tap selected by TBR2:TBR0, the TBIF bit gets set.
If the TBIE bit is set, an interrupt request is sent to the CPU. The TBIF flag is cleared by writing a 1 to the
TACK bit. The first time the TBIF flag is set after enabling the timebase module, the interrupt is generated
at approximately half of the overflow period. Subsequent events occur at the exact period.
Freescale Semiconductor
•
•
Software programmable 1-Hz, 4-Hz, 16-Hz, 256-Hz, 512-Hz, 1024-Hz, 2048-Hz, and 4096-Hz
periodic interrupt using external 32.768-kHz crystal
Configurable for operation during stop mode to allow periodic wakeup from stop
This module is designed for a 32.768-kHz oscillator.
MC68HC908GP32 Data Sheet, Rev. 10
NOTE
Figure
16-1, starts counting when
195