EP3C16F484A7N Altera, EP3C16F484A7N Datasheet - Page 127

• Manufacturer Part Number: EP3C16F484A7N
• Description: Cyclone III
• Manufacturer: Altera

Specifications of EP3C16F484A7N

• Family Name: Cyclone III
• Number Of Logic Blocks/elements: 15408
• # I/os (max): 346
• Frequency (max): 437.5MHz
• Process Technology: 65nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 15408
• Ram Bits: 516096
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FBGA
• Lead Free Status / Rohs Status: Compliant

Chapter 7: High-Speed Differential Interfaces in the Cyclone III Device Family
High-Speed I/O Interface
Table 7–1. Differential I/O Standards Supported in Cyclone III Device Family I/O Banks
© December 2009
LVDS
RSDS
mini-LVDS
PPDS
BLVDS
LVPECL
Differential SSTL-2
Differential SSTL-18
Differential HSTL-18
Differential HSTL-15
Differential HSTL-12
Notes to
(1) Transmitter and Receiver F
(2) The LVPECL I/O standard is only supported on dedicated clock input pins.
(3) The differential SSTL-2, SSTL-18, HSTL-18, HSTL-15, and HSTL-12 I/O standards are only supported on clock input pins and PLL output clock
Differential I/O Standards
pins. PLL output clock pins do not support Class II interface type of differential SSTL-18, HSTL-18, HSTL-15, and HSTL-12 I/O standards.
(1)
Table
(2)
7–1:
Altera Corporation
(3)
(3)
(3)
(3)
(3)
Table 7–1
family.
You can use I/O pins and internal logic to implement a high-speed differential
interface in the Cyclone III device family. The Cyclone III device family does not
contain dedicated serialization or deserialization circuitry. Therefore, shift registers,
internal phase-locked loops (PLLs), and I/O cells are used to perform
serial-to-parallel conversions on incoming data and parallel-to-serial conversion on
outgoing data. The differential interface data serializers and deserializers (SERDES)
are automatically constructed in the core logic elements (LEs) with the Quartus
software ALTLVDS megafunction.
MAX
depend on system topology and performance requirement.
lists which I/O bank supports these I/O standards in the Cyclone III device
I/O Bank Location
3, 4, 7, 8
1,2,5,6
1,2,5,6
1,2,5,6
1,2,5,6
All
All
All
All
All
All
All
All
All
All
All
External Resistor
Three Resistors
Three Resistors
Three Resistors
Three Resistors
Single Resistor
Single Resistor
Not Required
Not Required
Not Required
Not Required
Transmitter
Network at
NA
NA
NA
NA
NA
NA
Transmitter (TX)
Cyclone III Device Handbook, Volume 1
Supported
Yes
Yes
Yes
Yes
Yes
Not
Yes
Yes
Yes
Yes
Yes
Receiver (RX)
Supported
Supported
Supported
Yes
Not
Not
Not
Yes
Yes
Yes
Yes
Yes
Yes
Yes
®
II
7–3