MT46H64M16LFBF-6 IT:B Micron Technology Inc, MT46H64M16LFBF-6 IT:B Datasheet - Page 45

• Manufacturer Part Number: MT46H64M16LFBF-6 IT:B
• Description: 64MX16 MOBILE DDR SDRAM PLASTIC IND TEMP GREEN VFBGA 1.8V
• Manufacturer: Micron Technology Inc

Specifications of MT46H64M16LFBF-6 IT:B

• Lead Free Status / RoHS Status: Compliant

Figure 16: PRECHARGE Command
BURST TERMINATE
AUTO REFRESH
PDF: 09005aef83d9bee4
1gb_ddr_mobile_sdram_t68m.pdf - Rev. E 12/10 EN
Note:
BA0, BA1
The BURST TERMINATE command is used to truncate READ bursts with auto pre-
charge disabled. The most recently registered READ command prior to the BURST
TERMINATE command will be truncated, as described in READ Operation (page 65).
The open page from which the READ was terminated remains open.
AUTO REFRESH is used during normal operation of the device and is analogous to CAS#-
BEFORE-RAS# (CBR) REFRESH in FPM/EDO DRAM. The AUTO REFRESH command is
nonpersistent and must be issued each time a refresh is required.
Addressing is generated by the internal refresh controller. This makes the address bits a
“Don’t Care” during an AUTO REFRESH command.
For improved efficiency in scheduling and switching between tasks, some flexibility in
the absolute refresh interval is provided. The auto refresh period begins when the AU-
TO REFRESH command is registered and ends
Address
1. If A10 is HIGH, bank address becomes “Don’t Care.”
RAS#
CAS#
WE#
CK#
CKE
A10
CS#
CK
HIGH
Single bank
All banks
Bank
Don’t Care
45
1Gb: x16, x32 Mobile LPDDR SDRAM
Micron Technology, Inc. reserves the right to change products or specifications without notice.
t
RFC later.
© 2009 Micron Technology, Inc. All rights reserved.
Commands