C8051F336-GMR Silicon Laboratories Inc, C8051F336-GMR Datasheet - Page 218

• Manufacturer Part Number: C8051F336-GMR
• Description: Microcontrollers (MCU) 16KB 10ADC 10DAC 768Ram MCU Lead Free
• Manufacturer: Silicon Laboratories Inc

Specifications of C8051F336-GMR

• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 16 KB
• Data Ram Size: 768 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: QFN-20
• 3rd Party Development Tools: KSK-SL-TOOLSTICK, PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F336DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• On-chip Dac: 10 bit
• Package: 20QFN
• Device Core: 8051
• Family Name: C8051F336
• Maximum Speed: 25 MHz
• Ram Size: 768 Byte
• Operating Temperature: -40 to 85 °C
• Lead Free Status / Rohs Status: Details

C8051F336/7/8/9
SFR Definition 25.4. PCA0CPMn: PCA Capture/Compare Mode
SFR Addresses: PCA0CPM0 = 0xDA
218
Note: When the WDTE bit is set to 1, the PCA0CPM2 register cannot be modified, and module 2 acts as the
Name
Reset
Bit
Type
7
6
5
4
3
2
1
0
Bit
PWM16n 16-bit Pulse Width Modulation Enable.
watchdog timer. To change the contents of the PCA0CPM2 register or the function of module 2, the Watchdog
Timer must be disabled.
ECOMn
CAPNn
CAPPn
ECCFn
PWMn
Name
TOGn
MATn
PWM16n
R/W
7
0
This bit enables 16-bit mode when Pulse Width Modulation mode is enabled.
0: 8 to 11-bit PWM selected.
1: 16-bit PWM selected.
Comparator Function Enable.
This bit enables the comparator function for PCA module n when set to 1.
Capture Positive Function Enable.
This bit enables the positive edge capture for PCA module n when set to 1.
Capture Negative Function Enable.
This bit enables the negative edge capture for PCA module n when set to 1.
Match Function Enable.
This bit enables the match function for PCA module n when set to 1. When enabled,
matches of the PCA counter with a module's capture/compare register cause the CCFn
bit in PCA0MD register to be set to logic 1.
Toggle Function Enable.
This bit enables the toggle function for PCA module n when set to 1. When enabled,
matches of the PCA counter with a module's capture/compare register cause the logic
level on the CEXn pin to toggle. If the PWMn bit is also set to logic 1, the module oper-
ates in Frequency Output Mode.
Pulse Width Modulation Mode Enable.
This bit enables the PWM function for PCA module n when set to 1. When enabled, a
pulse width modulated signal is output on the CEXn pin. 8 to 11-bit PWM is used if
PWM16n is cleared; 16-bit mode is used if PWM16n is set to logic 1. If the TOGn bit is
also set, the module operates in Frequency Output Mode.
Capture/Compare Flag Interrupt Enable.
This bit sets the masking of the Capture/Compare Flag (CCFn) interrupt.
0: Disable CCFn interrupts.
1: Enable a Capture/Compare Flag interrupt request when CCFn is set.
ECOMn
R/W
6
0
CAPPn
R/W
,
5
0
PCA0CPM1 = 0xDB
CAPNn
R/W
Rev.1.0
4
0
Function
,
PCA0CPM2 = 0xDC
MATn
R/W
3
0
TOGn
R/W
2
0
PWMn
R/W
1
0
ECCFn
R/W
0
0