CN8236EBGB Mindspeed Technologies, CN8236EBGB Datasheet - Page 234

• Manufacturer Part Number: CN8236EBGB
• Description: ATM SAR 155Mbps 3.3V ABR/CBR/GFR/UBR/VBR 388-Pin BGA
• Manufacturer: Mindspeed Technologies

Specifications of CN8236EBGB

• Package: 388BGA
• Traffic Class: ABR|CBR|GFR|UBR|VBR
• Utopia Type: Level 1|Level 2
• Host Interface: PCI
• Maximum Data Rate: 155 Mbps
• Typical Operating Supply Voltage: 3.3 V
• Minimum Operating Supply Voltage: 3 V

7.0 OAM Functions
7.1 OAM Overview
7-4
7.1.2.3 Performance
Monitoring (PM)
Performance Monitoring includes a set of functions that monitor and process user
information on a channel to produce maintenance information specific to that
channel. This maintenance information is added to the in-rate data flow on that
channel in the form of PM cells, added at the source of a connection or link, and
extracted at the sink of a connection or link. With this maintenance information,
the user can estimate and analyze the transport integrity of that channel.
forward monitoring cells (which carry the forward error detection information),
and backward reporting cells (which carry the results of the performance
monitoring checks).
enables PM for a channel by setting the PM enable bits (PM_EN) in the
Segmentation and Reassembly VCC State table entries for that channel.
user cells on that channel. The size of this block of cells is set by the user, and can
have the value (N) of 128, 256, 512, or 1024 cells. The CN8236 inserts a PM cell
after every N user cells on that channel. A block size of 0 is valid when the SAR
is a destination point ONLY for PM processing. In this case, the segmentation
coprocessor only generates Backward reporting cells in response to reassembly
performance monitoring calculations.
establishment, or at any time after the connection has been established.
The PM flow is bidirectional, and PM cells are of two basic function types:
The CN8236 performs PM on up to 128 user-assigned channels. The SAR
The CN8236 performs PM processing on any channel by monitoring blocks of
PM as performed by the CN8236 calculates the following:
• Errored blocks (by means of a BIP-16 error detection code generated over
• A count of mis-inserted PM forward monitoring cells
The user can activate PM on any channel either during connection
the payloads of the user cells in the PM block)
Mindspeed Technologies
ATM ServiceSAR Plus with xBR Traffic Management
™
28236-DSH-001-B
CN8236