S9S12G128F0VLL Freescale Semiconductor, S9S12G128F0VLL Datasheet - Page 942

• Manufacturer Part Number: S9S12G128F0VLL
• Description: 16-bit Microcontrollers - MCU 16BIT 128K FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G128F0VLL

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 1 MHz
• Program Memory Size: 128 KB
• Data Ram Size: 8 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-100
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit, 12 bit
• A/d Channels Available: 12
• Interface Type: SPI
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 86
• Number Of Timers: 8
• Program Memory Type: Flash
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 3.13 V

64 KByte Flash Module (S12FTMRG64K1V1)
27.3.2.5
The FCNFG register enables the Flash command complete interrupt and forces ECC faults on Flash array
read access from the CPU.
CCIE, IGNSF, FDFD, and FSFD bits are readable and writable while remaining bits read 0 and are not
writable.
27.3.2.6
The FERCNFG register enables the Flash error interrupts for the FERSTAT flags.
944
Offset Module Base + 0x0004
Reset
IGNSF
FDFD
FSFD
Field
CCIE
7
4
1
0
W
R
CCIE
Command Complete Interrupt Enable — The CCIE bit controls interrupt generation when a Flash command
has completed.
0 Command complete interrupt disabled
1 An interrupt will be requested whenever the CCIF flag in the FSTAT register is set (see
Ignore Single Bit Fault — The IGNSF controls single bit fault reporting in the FERSTAT register (see
Section
0 All single bit faults detected during array reads are reported
1 Single bit faults detected during array reads are not reported and the single bit fault interrupt will not be
read operations and check the associated interrupt routine. The FDFD bit is cleared by writing a 0 to FDFD.
0 Flash array read operations will set the DFDIF flag in the FERSTAT register only if a double bit fault is detected
1 Any Flash array read operation will force the DFDIF flag in the FERSTAT register to be set (see
Force Single Bit Fault Detect
read operations and check the associated interrupt routine. The FSFD bit is cleared by writing a 0 to FSFD.
0 Flash array read operations will set the SFDIF flag in the FERSTAT register only if a single bit fault is detected
1 Flash array read operation will force the SFDIF flag in the FERSTAT register to be set (see
Force Double Bit Fault Detect — The FDFD bit allows the user to simulate a double bit fault during Flash array
Flash Configuration Register (FCNFG)
Flash Error Configuration Register (FERCNFG)
0
7
generated
Section
register is set (see
and an interrupt will be generated as long as the SFDIE interrupt enable in the FERCNFG register is set (see
Section
27.3.2.8).
27.3.2.7) and an interrupt will be generated as long as the DFDIE interrupt enable in the FERCNFG
27.3.2.6)
= Unimplemented or Reserved
0
0
6
Figure 27-9. Flash Configuration Register (FCNFG)
Section
MC9S12G Family Reference Manual,
Table 27-13. FCNFG Field Descriptions
27.3.2.6)
0
0
5
—
The FSFD bit allows the user to simulate a single bit fault during Flash array
IGNSF
0
4
Description
0
0
3
Rev.1.23
0
0
2
Freescale Semiconductor
FDFD
0
1
Section
Section
27.3.2.7)
FSFD
27.3.2.7)
0
0