AT32AP7001-ALUT Atmel, AT32AP7001-ALUT Datasheet - Page 104

• Manufacturer Part Number: AT32AP7001-ALUT
• Description: IC MCU 32BIT AVR32 208-LQFP
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7001-ALUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, POR, PWM, WDT
• Number Of I /o: 90
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EBI, ISI, MCI, PS2, SPI, TWI, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 90
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 1 Channel
• Package: 208PQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

11.5.10
32015G–AVR32–09/09
Reset Controller
The Reset Controller collects the various reset sources in the system and generates hard and
soft resets for the digital logic.
The device contains a Power-On Detector, which keeps the system reset until power is stable.
This eliminates the need for external reset circuitry to guarantee stable operation when powering
up the device.
It is also possible to reset the device by asserting the RESET_N pin. This pin has an internal pul-
lup, and does not need to be driven externally when negated.
Table 11-4
Figure 11-5. Reset Controller block diagram
Reset sources are divided into hard and soft resets. Hard resets imply that the system could
have become unstable, and virtually all logic will be reset. The clock generator, which also con-
trols the oscillators, will also be reset. If the device is reset due to a power-on reset, or reset
occurred when the device was in a sleep mode that disabled the oscillators, the normal oscillator
startup time will apply.
A soft reset will reset most digital logic in the device, such as CPU, HSB, and PB modules, but
not the OCD system, clock generator, Watchdog Timer and RTC, allowing some functions,
including the oscillators, to remain active during the reset. The startup time from a soft reset is
thus negligible. Note that all PB registers are reset, except those in the RTC/WDT. The
MCCTRL and CKSEL registers are reset, and the device will restart using Oscillator 0 as clock
source for all synchronous clocks.
In addition to the listed reset types, the JTAG can keep parts of the device statically reset
through the JTAG Reset Register. See JTAG documentation for details.
RESET_N
Power-On
Detector
lists these and other reset sources supported by the Reset Controller.
Watchdog Reset
NTAE
DBR
Controller
RC_RCAUSE
Reset
Hard Reset
Soft Reset
AT32AP7001
OCD, RTC/WDT
Clock Generato
CPU, HSB,
PBA, PBB
104