DF2398F20V Renesas Electronics America, DF2398F20V Datasheet - Page 111

• Manufacturer Part Number: DF2398F20V
• Description: IC H8S/2300 MCU FLASH 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2398F20V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: YR0K42378FC000BA - KIT EVAL FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

5.1
5.1.1
The H8S/2357 Group controls interrupts by means of an interrupt controller. The interrupt controller has the following
features:
Two interrupt control modes
Priorities settable with IPR
Independent vector addresses
Nine external interrupts
DTC and DMAC control
Any of two interrupt control modes can be set by means of the INTM1 and INTM0 bits in the system control
An interrupt priority register (IPR) is provided for setting interrupt priorities. Eight priority levels can be set for
NMI is assigned the highest priority level of 8, and can be accepted at all times.
All interrupt sources are assigned independent vector addresses, making it unnecessary for the source to be
NMI is the highest-priority interrupt, and is accepted at all times. Rising edge or falling edge can be selected for
Falling edge, rising edge, or both edge detection, or level sensing, can be selected for IRQ7 to IRQ0.
DTC and DMAC activation is performed by means of interrupts.
register (SYSCR).
each module for all interrupts except NMI.
identified in the interrupt handling routine.
NMI.
Overview
Features
Section 5 Interrupt Controller
Rev.6.00 Oct.28.2004 page 81 of 1016
REJ09B0138-0600H