DF2398F20V Renesas Electronics America, DF2398F20V Datasheet - Page 132

• Manufacturer Part Number: DF2398F20V
• Description: IC H8S/2300 MCU FLASH 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2398F20V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: YR0K42378FC000BA - KIT EVAL FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

If the same interrupt is selected as a DMAC activation source and a DTC activation source or CPU interrupt source,
operations are performed for them independently according to their respective operating statuses and bus mastership
priorities.
Table 5-11 summarizes interrupt source selection and interrupt source clearance control according to the settings of the
DTA bit of DMABCR in the DMAC, the DTCE bit of DTCERA to DTCERF in the DTC and the DISEL bit of MRB in
the DTC.
Table 5-11 Interrupt Source Selection and Clearing Control
Legend:
5.6.4
SCI and A/D converter interrupt sources are cleared when the DMAC or DTC reads or writes to the prescribed register,
and are not dependent upon the DTA bit or DISEL bit.
Rev.6.00 Oct.28.2004 page 102 of 1016
REJ09B0138-0600H
* :
: The relevant interrupt is used. Interrupt source clearing is performed.
: The relevant interrupt is used. The interrupt source is not cleared.
: The relevant bit cannot be used.
(The CPU should clear the source flag in the interrupt handling routine.)
Don't care
Note on Use
DMAC
DTA
0
1
Settings
DTC
DTCE
0
1
*
DISEL
*
0
1
*
Interrupt Source Selection/Clearing Control
DMAC
DTC
CPU