HD6417750SF200V Renesas Electronics America, HD6417750SF200V Datasheet - Page 855

• Manufacturer Part Number: HD6417750SF200V
• Description: MPU 3V 16K PB-FREE 208-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417750SF200V

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 28
• Program Memory Type: ROMless
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 2.07 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Figure 16.12 shows an example of the operation when modem control is used.
Serial data
16.4
The SCIF has four interrupt sources: transmit-FIFO-data-empty interrupt (TXI) request, receive-
error interrupt (ERI) request, receive-FIFO-data-full interrupt (RXI) request, and break interrupt
(BRI) request.
Table 16.6 shows the interrupt sources and their order of priority. The interrupt sources are
enabled or disabled by means of the TIE, RIE, and REIE bits in SCSCR2. A separate interrupt
request is sent to the interrupt controller for each of these interrupt sources.
When transmission/reception is carried out using the DMAC, output of interrupt requests to the
interrupt controller can be inhibited by clearing the RIE bit in SCSCR2 to 0. By setting the REIE
bit to 1 while the RIE bit is cleared to 0, it is possible to output ERI and BRI interrupt requests, but
not RXI interrupt requests.
When the TDFE flag in the serial status register (SCFSR2) is set to 1, a transmit-FIFO-data-empty
request is generated separately from the interrupt request. A transmit-FIFO-data-empty request can
activate the DMAC to perform data transfer.
When the RDF flag or DR flag in SCFSR2 is set to 1, a receive-FIFO-data-full request is
generated separately from the interrupt request. A receive-FIFO-data-full request can activate the
DMAC to perform data transfer.
When using the DMAC for transmission/reception, set and enable the DMAC before making the
SCIF settings. See section 14, Direct Memory Access Controller (DMAC), for details of the
DMAC setting procedure.
RTS2
RxD2
SCIF Interrupt Sources and the DMAC
Figure 16.12 Example of Operation Using Modem Control (RTS2)
Start
bit
0
D0
D1 D2
D7 0/1 1
Section 16 Serial Communication Interface with FIFO (SCIF)
Parity
bit
Stop
bit
Rev.7.00 Oct. 10, 2008 Page 769 of 1074
Start
bit
0
REJ09B0366-0700