UPD78F1211GB-GAF-AX Renesas Electronics America, UPD78F1211GB-GAF-AX Datasheet - Page 501

• Manufacturer Part Number: UPD78F1211GB-GAF-AX
• Description: MCU 16BIT 78K0R/LX3 44-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1211GB-GAF-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Cautions
Remark
q = 03, 05, 07
p = 02, 04, 06
1. TS00, TSp or TSq cannot be set to “1” (forcible restart) while TE00 = 1, TEp = 1, or TEq = 1. If
2. To change TOLp and TOLq, they must be rewritten when both the TOp and TOq pins are low-
TS00, TSp, or TSq is set to “1” while TE00 = 1, TEp = 1, or TEq = 1, the counter value (TCR00,
TCRp, or TCRq) will be illegal and TOp or TOq will not be able to output the expected
waveform.
level (inactive level). Note, however, that after TROp and TROq have been set to 0, the TOp
and TOq pins will not go low until the real-time output trigger is output. If TOLp and TOLq
are rewritten when the TOp and TOq pins are not low, they may output the same level.
Also, it is recommended to rewrite TROp, TROq, TOLp, TOLq, TMEp, and TMEq in the interrupt
processing of INTTM01, which is used as the real-time output trigger.
CHAPTER 7 INVERTER CONTROL FUNCTIONS
User’s Manual U19678EJ1V1UD
499