UPD78F1211GB-GAF-AX Renesas Electronics America, UPD78F1211GB-GAF-AX Datasheet - Page 971

• Manufacturer Part Number: UPD78F1211GB-GAF-AX
• Description: MCU 16BIT 78K0R/LX3 44-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1211GB-GAF-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

24.8 Flash Memory Programming by Self-Programming
program.
programming library, it can be used to upgrade the program in the field.
servicing can be executed. If an unmasked interrupt request is generated in the EI state, the request branches
directly from the self-programming library to the interrupt routine. After the self-programming mode is later restored,
self-programming can be resumed. However, the interrupt response time is different from that of the normal operation
mode.
The 78K0R/Ix3 supports a self-programming function that can be used to rewrite the flash memory via a user
If an interrupt occurs during self-programming, self-programming can be temporarily stopped and interrupt
Cautions 1. The self-programming function cannot be used when the CPU operates with the subsystem
Because this function allows a user application to rewrite the flash memory by using the 78K0R/Ix3 self-
2. In the self-programming mode, call the self-programming start library (FlashStart).
3. To prohibit an interrupt during self-programming, in the same way as in the normal operation
4. The self-programming function is disabled in the low consumption current mode. For details
5. Disable DMA operation (DENn = 0) during the execution of self programming library
clock (in products other than the 78K0R/IB3).
mode, execute the self-programming library in the state where the IE flag is cleared (0) by the
DI instruction. To enable an interrupt, clear (0) the interrupt mask flag to accept in the state
where the IE flag is set (1) by the EI instruction, and then execute the self-programming
library.
of the low consumption current mode, see CHAPTER 22 REGULATOR.
functions.
CHAPTER 24 FLASH MEMORY
User’s Manual U19678EJ1V1UD
969