AT91SAM7S128C-MU Atmel, AT91SAM7S128C-MU Datasheet - Page 624

• Manufacturer Part Number: AT91SAM7S128C-MU
• Description: IC MCU ARM7 128K FLASH 64-QFN
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S128C-MU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VQFN Exposed Pad, 64-HVQFN, 64-SQFN, 64-DHVQFN
• Core: ARM7TDMI
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: AT91SAM7S128-MU; AT91SAM7S128-MU

40.7
40.7.1
40.7.1.1
40.7.2
40.7.2.1
40.7.2.2
40.7.2.3
40.7.2.4
40.7.2.5
624
AT91SAM7S256 Errata - Revision A Parts
AT91SAM7S Series Preliminary
Chip ID
Analog-to-Digital Converter (ADC)
Wrong Chip ID Value
ADC: DRDY Bit Cleared
ADC: DRDY not Cleared on Disable
ADC: DRDY Possibly Skipped due to CDR Read
ADC: Possible Skip on DRDY when Disabling a Channel
ADC: GOVRE Bit is not Updated
Refer to
Important:
The Chip ID is 0x270D 0940 instead of 0x270B 0940.
None.
The DRDY Flag should be clear only after a read of ADC_LCDR (Last Converted Data Regis-
ter). A read of any ADC_CDRx register (Channel Data Register) automatically clears the DRDY
flag.
None
When reading LCDR at the same instant as an end of conversion, with DRDY already active,
DRDY is kept active regardless of the enable status of the current channel. This sets DRDY,
whereas new data is not stored.
None
Reading CDR for channel “y” at the same instant as an end of conversion on channel “x” with
EOC[x] already active, leads to skipping to set the DRDY flag if channel “x” is enabled.
Use of DRDY functionality with access to CDR registers should be avoided.
DRDY does not rise when disabling channel “y” at the same time as an end of “x” channel con-
version, although data is stored into CDRx and LCDR.
None.
Read of the Status Register at the same instant as an end of conversion leads to skipping the
update of the GOVRE (general overrun) flag. GOVRE is neither reset nor set.
For example, if reading the status while an end of conversion is occurring and:
Problem Fix/Workaround
Problem Fix/Workaround:
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
Section 40.1 “Marking” on page
Section 40.7.13.1 ”WDT: The Watchdog Timer May Lock the Device in a Reset State”
591.
6175K–ATARM–30-Aug-10