C500DA101 Omron, C500DA101 Datasheet - Page 157

• Manufacturer Part Number: C500DA101
• Description: ANALOG OUTPUT UNIT
• Manufacturer: Omron

Specifications of C500DA101

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• No. Of Analog Outputs: 4
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

9-1-7 Operation Flow
146
Specifications and General Information
Set output signals at PC power
interruption and recovery.
Set output signal range.
Set two-word or
four-word operating
mode.
Wire connections.
Mount the Unit.
Operate
Start
Set BCD or binary mode.
Specify whether to use
scaling function.
Specify whether to use
upper/lower limit function.
Specify whether to use
output ramp function.
Specify Memory Map
setting data.
Programming
Set output signals at PC power interruption and recovery by using the
short-circuit pins on the rear panel of the Unit.
Refer to 9-2-3 Setting the Output Signals at PC Power Interruption and
Recovery.
Set the mode for exchanging data with the CPU Unit by using the
two/four-word operating mode short-circuit pins on the front panel of
the Analog Output Unit.
Refer to 9-3 Data Exchange with CPU Unit and 9-2-2 Setting the
Two-word or Four-word Operating Mode.
Select an output signal range from four voltage output ranges and two
current output ranges by using the DIP switches on the rear panel of the
Unit.
For voltage output, set the output signal range using the short-circuit
pins on the front panel of the Unit.
Refer to 9-2-1 Setting the Output Signal Range.
Refer to 9-4-1 BCD/Binary Mode.
Refer to 9-4-2 Scaling.
Refer to 9-2-4 Wiring.
Refer to 9-4-4 Upper/Lower LImits.
Refer to 9-4-3 Output Ramps.
Refer to 9-3-3 Memory Map.
Refer to 9-3 Data Exchange with CPU
Unit, 9-3-2 Allocated I/O Words, and 9-5
Programming Examples.
Section
9-1