C500DA101 Omron, C500DA101 Datasheet - Page 202

• Manufacturer Part Number: C500DA101
• Description: ANALOG OUTPUT UNIT
• Manufacturer: Omron

Specifications of C500DA101

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• No. Of Analog Outputs: 4
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

EEPROM Write Count
EEPROM Write Result
User Programming Examples
Note When the total write count reaches 5,000, write 4F43 (one word only) to enable
For programming examples, see EEPROM Write Programming Example on
page 192.
There is a limit to the EEPROM write count. When the total EEPROM count ex-
ceeds 9,999, the RUN indicator will flash. If this occurs, replace the Unit.
The following bits of word 60 in RAM turn ON according to the result of the EE-
PROM write process.
writing beyond 5,000 times. If 4F43 is not written, further writing to EEPROM will
not be possible.
01
02
03
04
05
06
3. Bit 3 of word n (EEPROM Write Bit) is turned ON to write data from RAM to
Bit
EEPROM. When the write process has been completed, word 59 in RAM or
EEPROM (Total EEPROM Write Count) is incremented by 1.
Turns ON when the total EEPROM write count reaches 5,000 (see note).
Turns ON when the total EEPROM write count reaches 10,000. At the
same time, the RUN indicator flashes. Replace the Unit.
Turn ON when an internal diagnostic error occurs at startup. At the same
time, the ERROR indicator lights. Replace the Unit.
Status
Section
191
9-5