C500DA101 Omron, C500DA101 Datasheet - Page 83

• Manufacturer Part Number: C500DA101
• Description: ANALOG OUTPUT UNIT
• Manufacturer: Omron

Specifications of C500DA101

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• No. Of Analog Outputs: 4
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5-1-7 DIP Switches and Slide Switches
68
Specifications and General Information
DIP switch pins
for inputs 1 and 2
DIP switch pins for
inputs 15 and 16
The DIP switches and slide switches are located beneath the detachable termi-
nal block. To set these switches, first remove the upper and lower set screws and
the remove the terminal block.
The locations of the DIP switches and slide switches are shown in the following
diagrams. The DIP switch pins are divided into groups of four pins each (pins 1 to
4 and pins 5 to 8). They are used to set inputs 1 to 16 in order from the indicator
cover. One slide switch is allocated for each input. They are used to set inputs 1
to 16 in order from the indicator cover.
Slide switch for
input 1
Board
Slide switch for
input 16
DIP switch
pins for
input 6
DIP switch
pins for
input 5
DIP switch
pins for
input 7
Slide
switch
for input
4
Slide
switch
for input
5
Slide
switch
for input
6
Section
5-1