C500DA101 Omron, C500DA101 Datasheet - Page 16

• Manufacturer Part Number: C500DA101
• Description: ANALOG OUTPUT UNIT
• Manufacturer: Omron

Specifications of C500DA101

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• No. Of Analog Outputs: 4
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Application Precautions
xviii
• Interlock circuits, limit circuits, and similar safety measures in external circuits
• Always use the power supply voltage specified in this manual. An incorrect
• Take appropriate measures to ensure that the specified power with the rated
• Install external breakers and take other safety measures against short-circuit-
• Do not apply voltages to the Input Units in excess of the rated input voltage.
• Do not apply voltages or connect loads to the Output Units in excess of the
• Disconnect the functional ground terminal when performing withstand voltage
• Do not attempt to disassemble, repair, or modify any Units.
• Tighten screws on the terminal block to a torque of 0.8 N S m. Incorrect tighten-
• Be careful not to allow wire cuttings to enter inside the Unit when wiring. Allow-
• Use crimp terminals for wiring. Do not connect bare stranded wires directly to
• Double-check all the wiring before turning on the power supply. Incorrect wir-
• Mount the Unit only after checking the terminal block completely.
• Be sure that the terminal blocks, Memory Units, expansion cables, and other
• Check the user program for proper execution before actually running it on the
• Confirm that no adverse effect will occur in the system before attempting any of
• Resume operation only after transferring to the new CPU Unit the contents of
• Do not pull on the cables or bend the cables beyond their natural limit. Doing
• Do not place objects on top of the cables or other wiring lines. Doing so may
• Before touching the Unit, be sure to first touch a grounded metallic object in
• When replacing parts, be sure to confirm that the rating of a new part is correct.
(i.e., not in the Programmable Controller) must be provided by the customer.
voltage may result in malfunction or burning.
voltage and frequency is supplied. Be particularly careful in places where the
power supply is unstable. An incorrect power supply may result in malfunction.
ing in external wiring. Insufficient safety measures against short-circuiting may
result in burning.
Excess voltages may result in burning.
maximum switching capacity. Excess voltage or loads may result in burning.
tests. Not disconnecting the functional ground terminal may result in burning.
ing torque may result in malfunction.
ing wire cuttings inside the Unit may result in malfunction.
terminals. Connection of bare stranded wires may result in burning.
ing may result in burning.
items with locking devices are properly locked into place. Improper locking
may result in malfunction.
Unit. Not checking the program may result in an unexpected operation.
the following. Not doing so may result in an unexpected operation.
the DM Area, HR Area, and other data required for resuming operation. Not
doing so may result in an unexpected operation.
either of these may break the cables.
break the cables.
order to discharge any static built-up. Not doing so may result in malfunction or
damage.
Not doing so may result in malfunction or burning.
• Changing the operating mode of the PC.
• Force-setting/force-resetting any bit in memory.
• Changing the present value of any word or any set value in memory.
5