FW82801DB S L66K Intel, FW82801DB S L66K Datasheet - Page 472

no-image

FW82801DB S L66K

Manufacturer Part Number
FW82801DB S L66K
Description
Manufacturer
Intel
Datasheet

Specifications of FW82801DB S L66K

Lead Free Status / RoHS Status
Supplier Unconfirmed
AC ’97 Audio Controller Registers (D31:F5)
14.1.9
14.1.10
472
Note: The tertiary codec cannot be addressed via this address space. The tertiary space is only available
HEDT—Header Type Register (Audio—D31:F5)
Address Offset:
Default Value:
Lockable:
NAMBAR—Native Audio Mixer Base Address Register
(Audio—D31:F5)
Address Offset:
Default Value:
Lockable:
The Native PCI Mode Audio function uses PCI Base Address register #1 to request a contiguous
block of I/O space that is to be used for the Native Audio Mixer software interface. The mixer
requires 256 bytes of I/O space. Native Audio Mixer and Modem codec I/O registers are located
from 00h to 7Fh and reside in the codec. Access to these registers will be decoded by the AC '97
controller and forwarded over the AC-link to the codec. The codec will then respond with the
register value.
In the case of the split codec implementation, accesses to the different codecs are differentiated by
the controller by using address offsets 00h
for the secondary codec.
from the new MMBAR register. This register powers up as read only and only becomes writeable
when the IOSE bit in offset 41h is set.
For description of these I/O registers, refer to the Audio Codec ‘97 Component Specification,
Version 2.3.
31:16
7:0
15:8
Bit
Bit
7:1
0
Header Type — RO. Hardwired to 00h.
Hardwired to 0s
Base Address — R/W. These bits are used in the I/O space decode of the Native Audio Mixer
interface registers. The number of upper bits that a device actually implements depends on how
much of the address space the device will respond to. For the AC ‘97 mixer, the upper 16 bits are
hardwired to 0, while bits 15:8 are programmable. This configuration yields a maximum I/O block
size of 256 bytes for this base address.
Reserved. Read as 0s.
Resource Type Indicator (RTE) — RO. Hardwired to 1, indicating a request for I/O space.
0Eh
00h
No
10
00000001h
No
13h
7Fh for the primary codec and address offsets 80h
Description
Description
Attribute:
Size:
Power Well:
Attribute:
Size:
Power Well:
Intel
RO
8 bits
Core
R/W, RO
32 bits
Core
®
82801DB ICH4 Datasheet
FEh

Related parts for FW82801DB S L66K