ADUC7033BCPZ-8L Analog Devices Inc, ADUC7033BCPZ-8L Datasheet - Page 111

• Manufacturer Part Number: ADUC7033BCPZ-8L
• Description: IC MCU FLASH 96K ANLG I/O 48LFCS
• Manufacturer: Analog Devices Inc
• Type: Battery Managementr

Specifications of ADUC7033BCPZ-8L

• Input Type: Logic
• Output Type: Logic
• Interface: UART, SPI
• Current - Supply: 20mA
• Mounting Type: Surface Mount
• Package / Case: 48-LFCSP
• For Use With: EVAL-ADUC7033QSPZ - EVAL DEV QUICK START ADUC7033
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

UART Control Register 1
Name:
Address:
Default Value:
Access:
Function:
Table 82. COMCON1 MMR Bit Designations
Bit
7 to 6
5
4
3 to 0
UART Status Register 0
Name:
Address:
Default Value:
Access:
Function:
Table 83. COMSTA0 MMR Bit Designations
Bit
7
6
5
4
3
2
1
0
COMCON1
0xFFFF0710
0x00
Read/write
This 8-bit register controls the operation of the UART in conjunction with COMCON0.
COMSTA0
0xFFFF0714
0x60
Read only
This 8-bit, read-only register reflects the current status on the UART.
Name
LOOPBACK
Name
TEMT
THRE
BI
FE
PE
OE
DR
transmitted, that is, it is no longer present in the shift register.
may not have been transmitted yet and can still be present in the shift register.
Description
UART Input Mux.
00 = RxD driven by LIN input; required for LIN communications using the LIN pin.
01 = reserved.
10 = RxD driven by GP5; required for serial communications using GPIO_5 pin (RxD).
11 = reserved.
Reserved. Not used.
Loopback. Set by user to enable loopback mode. In loopback mode, the TxD is forced high.
Reserved. Not used.
Description
Reserved.
COMTX and Shift Register Empty Status Bit.
Set automatically if COMTX and the shift register are empty. This bit indicates that the data has been
Cleared automatically when writing to COMTX.
COMTX Empty Status Bit.
Set automatically if COMTX is empty. COMTX can be written as soon as this bit is set, the previous data
Cleared automatically when writing to COMTX.
Break Indicator.
Set when SIN is held low for more than the maximum word length.
Cleared automatically.
Framing Error.
Set when the stop bit is invalid.
Cleared automatically.
Parity Error.
Set when a parity error occurs.
Cleared automatically.
Overrun Error.
Set automatically if data are overwritten before being read.
Cleared automatically.
Data Ready.
Set automatically when COMRX is full.
Cleared by reading COMRX.
Rev. B | Page 111 of 140
ADuC7033