ADUC7033BCPZ-8L Analog Devices Inc, ADUC7033BCPZ-8L Datasheet - Page 57

• Manufacturer Part Number: ADUC7033BCPZ-8L
• Description: IC MCU FLASH 96K ANLG I/O 48LFCS
• Manufacturer: Analog Devices Inc
• Type: Battery Managementr

Specifications of ADUC7033BCPZ-8L

• Input Type: Logic
• Output Type: Logic
• Interface: UART, SPI
• Current - Supply: 20mA
• Mounting Type: Surface Mount
• Package / Case: 48-LFCSP
• For Use With: EVAL-ADUC7033QSPZ - EVAL DEV QUICK START ADUC7033
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Temperature Channel ADC Offset Calibration Register
Name:
Address:
Default
Value:
Access:
Function:
Current Channel ADC Gain Calibration Register
Name:
Address:
Default
Value:
Access:
Function:
ADC2OF
0xFFFF0538
Part specific, factory programmed
Read/write
This ADC Offset MMR holds a 16-bit offset cali-
bration coefficient for the temperature channel.
The register is configured at power-on with a
factory default value. However, this register is
automatically overwritten if an offset calibration
of the temperature channel is initiated by the user
via bits in the ADCMDE MMR. User code can only
write to this calibration register if the ADC
is in idle mode. An ADC must be enabled and in
idle mode before being written to any offset or
gain register. The ADC must be in idle mode for at
least 23 μs.
ADC0GN
0xFFFF053C
Part specific, factory programmed
Read/write
This gain MMR holds a 16-bit gain calibration
coefficient for scaling the I-ADC conversion result.
The register is configured at power-on with a
factory default value. However, this register is
automatically overwritten if a gain calibration of
the I-ADC is initiated by the user via bits in the
ADCMDE MMR. User code can only write to this
calibration register if the ADC is in idle mode. An
ADC must be enabled and in idle mode before
being written to any offset or gain register. The
ADC must be in idle mode for at least 23 μs.
Rev. B | Page 57 of 140
Voltage Channel Gain Calibration Register
Name:
Address:
Default
Value:
Access:
Function:
Temperature Channel Gain Calibration Register
Name:
Address:
Default
Value:
Access:
Function:
ADC1GN
0xFFFF0540
Part specific, factory programmed
Read/write
This gain MMR holds a 16-bit gain calibration
coefficient for scaling a voltage channel conversion
result. The register is configured at power-on with
a factory default value. However, this register is
automatically overwritten if a gain calibration of
the voltage channel is initiated by the user via bits
in the ADCMDE MMR. User code can only write
to this calibration register if the ADC is in idle
mode. An ADC must be enabled and in idle mode
before being written to any offset or gain register.
The ADC must be in idle mode for at least 23 μs.
ADC2GN
0xFFFF0544
Part specific, factory programmed
Read/write
This gain MMR holds a 16-bit gain calibration
coefficient for scaling a temperature channel
conversion result. The register is configured at
power-on with a factory default value. However,
this register is automatically overwritten if a gain
calibration of the temperature channel is initiated
by the user via bits in the ADCMDE MMR. User
code can only write to this calibration register if the
ADC is in idle mode. An ADC must be enabled
and in idle mode before being written to any offset
or gain register. The ADC must be in idle mode for
at least 23 μs.
ADuC7033