NS5-MQ10B-V2 Omron, NS5-MQ10B-V2 Datasheet - Page 220

• Manufacturer Part Number: NS5-MQ10B-V2
• Description: 5 Mono Tchsrn,Serial+USB,Bk 60
• Manufacturer: Omron

Specifications of NS5-MQ10B-V2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6-6 Communications Settings
6-6-6
6-46
Setting Bar Code Readers
Note: Using the Controller Link network and the network number cannot be changed at the PT. If you
The PT has a Bar Code Reader input function allowing input of barcode data as character
strings in the String Display & Input object.
The methods for setting the communications conditions with the Bar Code Reader are de-
scribed here.
Set the communications conditions and confirmation method for the Bar Code Reader using
the following procedure from the System Menu.
Set the Bar Code Reader’s communications method for serial port A or serial port B.
The setting items for the Bar Code Reader will be displayed on the right side of the screen.
Set the Communications speed, data bits, stop bits, parity, and input method.
After setting, press the Write Button to save the settings.
• Setting Communications Conditions for Bar Code Reader Mode
Comm. Speed
Read Status
Read Allocation
Add.
Reference
Comm. speed
Data bits
Stop bits
Parity
Input method
Continuous input
Setting item
change the setting, display the communications settings in the CX-Designer by selecting PT –
Communication Setting, change the setting, and then transfer the project to the PT.
• Refer to 3-4 Connecting to Bar Code Readers for information on methods for connect-
• The Bar Code Reader can be connected to either serial port A or serial port B only.
ing Bar Code Readers.
Sets the baud rate.
Displays whether Controller Link status is read (display
only).
Displays address where status is read (display only).
Sets the communications speed for
communications with the Bar Code
Reader.
Sets the data bit length.
Sets the data stop bit length.
Sets the data parity bits.
Sets the confirmation method used after
inputting data in the input column.
Sets continuous barcode input to Yes or
No.
Function
500K, 1M, or 2M
None, odd, or even
4800, 9600, or 19200 (bps)
7 or 8 bits
1 or 2 bits
Auto or manual confirmation
Yes or No
Settings