ATmega16HVB Atmel Corporation, ATmega16HVB Datasheet - Page 144

• Manufacturer Part Number: ATmega16HVB
• Manufacturer: Atmel Corporation

Specifications of ATmega16HVB

• Flash (kbytes): 16 Kbytes
• Pin Count: 44
• Max. Operating Frequency: 8 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 8
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 17
• Ext Interrupts: 15
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 12
• Adc Speed (ksps): 1.9
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 1
• Eeprom (bytes): 512
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 4.0 to 25
• Operating Voltage (vcc): 4.0 to 25
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 4
• Input Capture Channels: 2
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

24.7.12
144
ATmega16HVB/32HVB
BPIFR – Battery Protection Interrupt Flag Register
• Bit 3 – DOCIE: Discharge Over-current Protection Activated Interrupt
The DOCIE bit enables interrupt caused by the Discharge Over-current Protection Activated
Interrupt.
• Bit 2 – COCIE: Charge Over-current Protection Activated Interrupt
The COCIE bit enables interrupt caused by the Charge Over-current Protection Activated
Interrupt.
• Bit 1 – DHCIE : Discharger High-current Protection Activated Interrupt
The DHCIE bit enables interrupt caused by the Discharge High-current Protection Activated
Interrupt.
• Bit 0 – CHCIE : Charger High-current Protection Activated Interrupt
The CHCIE bit enables interrupt caused by the Charge High-current Protection Activated
Interrupt.
• Bit 7:5 – Res: Reserved
These bits are reserved and will always read as zero.
• Bit 4 – SCIF: Short-circuit Protection Activated Interrupt
Once Short-circuit violation is detected, SCIF becomes set. The flag is cleared by writing a logic
one to it.
• Bit 3 – DOCIF: Discharge Over-current Protection Activated Interrupt
Once Discharge Over-current violation is detected, DOCIF becomes set. The flag is cleared by
writing a logic one to it.
• Bit 2 – COCIF: Charge Over-current Protection Activated Interrupt
Once Charge Over-current violation is detected, COCIF becomes set. The flag is cleared by
writing a logic one to it.
• Bit 1 – DHCIF: Discharge High-current Protection Activated Interrupt
Once Discharge High-current violation is detected, DHCIF becomes set. The flag is cleared by
writing a logic one to it.
• Bit 0 – CHCIF: Charge High-current Protection Activated Interrupt
Once Charge High-current violation is detected, CHCIF becomes set. The flag is cleared by writ-
ing a logic one to it.
Bit
(0xF3)
Read/Write
Initial Value
R
7
–
0
R
6
–
0
R
5
–
0
SCIF
R/W
4
0
DOCIF
R/W
3
0
COCIF
R/W
2
0
DHCIF
R/W
1
0
CHCIF
R/W
0
0
8042D–AVR–10/11
BPIFR