ATmega16HVB Atmel Corporation, ATmega16HVB Datasheet - Page 97

• Manufacturer Part Number: ATmega16HVB
• Manufacturer: Atmel Corporation

Specifications of ATmega16HVB

• Flash (kbytes): 16 Kbytes
• Pin Count: 44
• Max. Operating Frequency: 8 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 8
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 17
• Ext Interrupts: 15
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 12
• Adc Speed (ksps): 1.9
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 1
• Eeprom (bytes): 512
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 4.0 to 25
• Operating Voltage (vcc): 4.0 to 25
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 4
• Input Capture Channels: 2
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

ATmega16HVB/32HVB
• Bit 2 – OCFnB: Output Compare Flag n B
The OCFnB bit is set when a Compare Match occurs between the Timer/Counter and the data in
OCRnB – Output Compare Register n B. OCFnB is cleared by hardware when executing the
corresponding interrupt handling vector. Alternatively, OCFnB is cleared by writing a logic one to
the flag. When the I-bit in SREG, OCIEnB (Timer/Counter Compare B Match Interrupt Enable),
and OCFnB are set, the Timer/Counter Compare Match Interrupt is executed.
The OCFnB is not set in 16-bit Output Compare mode when the Output Compare Register
OCRnB is used as the high byte of the 16-bit Output Compare Register or in 16-bit Input Cap-
ture mode when the Output Compare Register OCRnB is used as the high byte of the Input
Capture Register.
• Bit 1 – OCFnA: Output Compare Flag n A
The OCFnA bit is set when a Compare Match occurs between the Timer/Counter n and the data
in OCRnA – Output Compare Register n. OCFnA is cleared by hardware when executing the
corresponding interrupt handling vector. Alternatively, OCFnA is cleared by writing a logic one to
the flag. When the I-bit in SREG, OCIEnA (Timer/Counter n Compare Match Interrupt Enable),
and OCFnA are set, the Timer/Counter n Compare Match Interrupt is executed.
The OCFnA is also set in 16-bit mode when a Compare Match occurs between the Timer/Coun-
ter n and 16-bit data in OCRnB/A. The OCFnA is not set in Input Capture mode when the Output
Compare Register OCRnA is used as an Input Capture Register.
• Bit 0 – TOVn: Timer/Counter n Overflow Flag
The bit TOVn is set when an overflow occurs in Timer/Counter n. TOVn is cleared by hardware
when executing the corresponding interrupt handling vector. Alternatively, TOVn is cleared by
writing a logic one to the flag. When the SREG I-bit, TOIEn (Timer/Counter n Overflow Interrupt
Enable), and TOVn are set, the Timer/Counter n Overflow interrupt is executed.
97
8042D–AVR–10/11