AT91SAM7A3-AU Atmel, AT91SAM7A3-AU Datasheet - Page 519

• Manufacturer Part Number: AT91SAM7A3-AU
• Description: IC ARM7 MCU FLASH 256K 100LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7A3-AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 60MHz
• Connectivity: CAN, I²C, MMC, SPI, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Controller Family/series: AT91SAM7xx
• No. Of I/o's: 62
• Ram Memory Size: 32KB
• Cpu Speed: 60MHz
• No. Of Timers: 3
• Rohs Compliant: Yes
• Package: 100LQFP
• Device Core: ARM7TDMI
• Family Name: 91S
• Maximum Speed: 60 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 62
• Interface Type: CAN/SPI/I2S/TWI/USART/USB
• On-chip Adc: 2(8-chx10-bit)
• Number Of Timers: 3
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Ram Size: 32 KB
• Maximum Clock Frequency: 60 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7A3-EK
• Minimum Operating Temperature: - 40 C
• Cpu Family: 91S
• Device Core Size: 32b
• Frequency (max): 60MHz
• Total Internal Ram Size: 32KB
• # I/os (max): 62
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7A3-EK - KIT EVAL FOR AT91SAM7A3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Figure 36-20. Time Triggered Principle
6042E–ATARM–14-Dec-06
Synchronization by a Reference Message
Transmitting within a Time Window
Freezing the Internal Timer Counter
Reference
Message
Time Trigger Mode is enabled by setting the TTM field in the CAN_MR register. In Time Trig-
gered Mode, as in Timestamp Mode, the CAN_TIMESTP field captures the values of the
internal counter, but the MTIMESTAMP fields in the CAN_MSRx registers are not active and
are read at 0.
In Time Triggered Mode, the internal timer counter is automatically reset when a new mes-
sage is received in the last mailbox. This reset occurs after the reception of the End Of Frame
on the rising edge of the MRDY signal in the CAN_MSRx register. This allows synchronization
of the internal timer counter with the reception of a reference message and the start a new
time window.
A time mark is defined for each mailbox. It is defined in the 16-bit MTIMEMARK field of the
CAN_MMRx register. At each internal timer clock cycle, the value of the CAN_TIM is com-
pared with each mailbox time mark. When the internal timer counter reaches the
MTIMEMARK value, an internal timer event for the mailbox is generated for the mailbox.
In Time Triggered Mode, transmit operations are delayed until the internal timer event for the
mailbox. The application prepares a message to be sent by setting the MTCR in the
CAN_MCRx register. The message is not sent until the CAN_TIM value is less than the
MTIMEMARK value defined in the CAN_MMRx register.
If the transmit operation is failed, i.e., the message loses the bus arbitration and the next trans-
mit attempt is delayed until the next internal time trigger event. This prevents overlapping the
next time window, but the message is still pending and is retried in the next time window when
CAN_TIM value equals the MTIMEMARK value. It is also possible to prevent a retry by setting
the DRPT field in the CAN_MR register.
The internal counter can be frozen by setting TIMFRZ in the CAN_MR register. This prevents
an unexpected roll-over when the counter reaches FFFFh. When this occurs, it automatically
freezes until a new reset is issued, either due to a message received in the last mailbox or any
other reset counter operations. The TOVF bit in the CAN_SR register is set when the counter
is frozen. The TOVF bit in the CAN_SR register is cleared by reading the CAN_SR register.
Depending on the corresponding interrupt mask in the CAN_IMR register, an interrupt is gen-
erated when TOVF is set.
Time Cycle
Time Windows for Messages
Global Time
AT91SAM7A3 Preliminary
Reference
Message
519