AT91SAM7A3-AU Atmel, AT91SAM7A3-AU Datasheet - Page 544

• Manufacturer Part Number: AT91SAM7A3-AU
• Description: IC ARM7 MCU FLASH 256K 100LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7A3-AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 60MHz
• Connectivity: CAN, I²C, MMC, SPI, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Controller Family/series: AT91SAM7xx
• No. Of I/o's: 62
• Ram Memory Size: 32KB
• Cpu Speed: 60MHz
• No. Of Timers: 3
• Rohs Compliant: Yes
• Package: 100LQFP
• Device Core: ARM7TDMI
• Family Name: 91S
• Maximum Speed: 60 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 62
• Interface Type: CAN/SPI/I2S/TWI/USART/USB
• On-chip Adc: 2(8-chx10-bit)
• Number Of Timers: 3
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Ram Size: 32 KB
• Maximum Clock Frequency: 60 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7A3-EK
• Minimum Operating Temperature: - 40 C
• Cpu Family: 91S
• Device Core Size: 32b
• Frequency (max): 60MHz
• Total Internal Ram Size: 32KB
• # I/os (max): 62
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7A3-EK - KIT EVAL FOR AT91SAM7A3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

• MRDY: Mailbox Ready
An interrupt is triggered when MRDY is set.
0 = Mailbox data registers can not be read/written by the software application. CAN_MDx are locked by the CAN_MDx.
1 = Mailbox data registers can be read/written by the software application.
This flag is cleared by writing to CAN_MCRx register.
• MMI: Mailbox Message Ignored
0 = No message has been ignored during the previous transfer
1 = At least one message has been ignored during the previous transfer
Cleared by reading the CAN_MSRx register.
6042E–ATARM–14-Dec-06
Mailbox Object Type
Receive
Receive with overwrite
Transmit
Consumer
Producer
Mailbox Object Type
Receive
Receive with overwrite
Transmit
Consumer
Producer
At least one message has been received since the last mailbox transfer order. Data from the first frame
received can be read in the CAN_MDxx registers.
After setting the MOT field in the CAN_MMR, MRDY is reset to 0.
At least one frame has been received since the last mailbox transfer order. Data from the last frame received
can be read in the CAN_MDxx registers.
After setting the MOT field in the CAN_MMR, MRDY is reset to 0.
Mailbox data have been transmitted.
After setting the MOT field in the CAN_MMR, MRDY is reset to 1.
At least one message has been received since the last mailbox transfer order. Data from the first message
received can be read in the CAN_MDxx registers.
After setting the MOT field in the CAN_MMR, MRDY is reset to 0.
A remote frame has been received, mailbox data have been transmitted.
After setting the MOT field in the CAN_MMR, MRDY is reset to 1.
Description
Description
Set when at least two messages intended for the mailbox have been sent. The first one is available in the
mailbox data register. Others have been ignored. A mailbox with a lower priority may have accepted the
message.
Set when at least two messages intended for the mailbox have been sent. The last one is available in the
mailbox data register. Previous ones have been lost.
Reserved
A remote frame has been sent by the mailbox but several messages have been received. The first one is
available in the mailbox data register. Others have been ignored. Another mailbox with a lower priority may
have accepted the message.
A remote frame has been received, but no data are available to be sent.
AT91SAM7A3 Preliminary
544