AT91SAM9XE512-CU Atmel, AT91SAM9XE512-CU Datasheet - Page 842

• Manufacturer Part Number: AT91SAM9XE512-CU
• Description: MCU ARM9 512K FLASH 217-BGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9XE512-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 56K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 217-LFBGA
• Package: 217LFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 180 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 96
• Interface Type: EBI/Ethernet/SPI/TWI/USART/USB
• On-chip Adc: 4-chx10-bit
• Number Of Timers: 6
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Ram Size: 32 KB
• Maximum Clock Frequency: 180 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, KSK-AT91SAM9XE-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9XE-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM9XE-EK - KIT EVAL FOR AT91SAM9XEAT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

46.2.8
46.2.8.1
46.2.8.2
46.2.9
46.2.9.1
46.2.9.2
842
AT91SAM9XE128/256/512 Preliminary
Two-wire Interface (TWI)
USB Host Port (UHP)
TWI: Software Reset
TWI: Overrun in Master Read Mode
UHP: Non-ISO IN transfers
UHP: ISO OUT Transfers
The RXRDY Flag is not reset when a software reset is performed.
None.
When the shift register and the receive holding register (RHR) are full and TWI reads new data,
then an overrun error occurs.
None.
Conditions:
Consider the following sequence:
Consequence: When this defect manifests itself, the Host controller re-attempts the same IN
token.
This problem can be avoided if the system guarantees that the status update can be completed
within the same frame.
Conditions:
Consider the following sequence:
1. The Host controller issues an IN token.
2. The Device provides the IN data in a short packet.
3. The Host controller writes the received data to the system memory.
4. The Host controller is now supposed to carry out two Write transactions (TD status
5. The Host controller raises the request for the first write transaction. By the time the
6. After completing the first write transaction, the Host controller skips the second write
1. The Host controller sends an ISO OUT token after fetching 16 bytes of data from the
2. When the Host controller is sending the ISO OUT data, because of system latencies,
3. While there is an underrun condition, if the Host controller is in the process of bit-stuff-
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
write and TD retirement write) to the system memory in order to complete the status
update.
transaction is completed, a frame boundary is crossed.
transaction.
system memory.
remaining bytes of the packet are not available. This results in a buffer underrun
condition.
ing, it causes the Host controller to hang.
6254C–ATARM–22-Jan-10